Back
Manufacturing / Industrial • Inspections

ITW (Spraying cell) Autosupply Station & Auto UFD Daily Preventive Maintenance Checklist

This procedure outlines the daily preventive maintenance of the ITW spraying cell and Auto UFD system, covering air pressure, sensor temperature, heater condition, nozzle performance, and robotic movement. Routine checks help prevent failures, maintain consistent spray quality, and ensure reliable automated operation.
Seoyon E Hwa
07/04/2025

ITW (Spraying cell) Autosupply Station & Auto UFD Daily Preventive Maintenance Checklist

This procedure outlines the daily preventive maintenance of the ITW spraying cell and Auto UFD system, covering air pressure, sensor temperature, heater condition, nozzle performance, and robotic movement. Routine checks help prevent failures, maintain consistent spray quality, and ensure reliable automated operation.

    check the pressure of air regulator

    spec : max, 6 bar

    • Picture1.png
    $

    check the leakage of air

    • Picture2.jpg

    check the loosen of fixed screw

    • Picture3.png

    check the temperature of sensor

    check the condition from dirt

    • Picture5.png

    check the pattern of applicator nozzle

    check the cleaning of robot & tool

    • Picture7.png

    check the movement of robots

    • Picture8.png
Source: Seoyon E Hwa (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.