Back
Manufacturing / Industrial • Inspections

Weekly Erbatech Unwinder Stand Inspection

This procedure ensures the Erbatech Unwinder Stand operates safely and reliably by verifying the condition of its key components on a weekly basis.
CWT Henry - Fernley, NV
02/05/2026

Weekly Erbatech Unwinder Stand Inspection

This procedure outlines the weekly inspection of the Erbatech Unwinder Stand, covering brake assemblies, rollers, pneumatic components, and sensor/I-O connections, to verify safe and reliable operation.

    Unwind Stand Brake Assemblies

    Inspect all 8 break assemblies in Unwind station

    Brake Assemblies

    • IMG_0060.jpg
    • IMG_0062.jpg
    • IMG_0064.jpg
    • IMG_0571.jpeg
    • IMG_0570.jpeg

    All Brakes with horse shoes have fasteners torqued and sight marked?

    • Pass
    • Flag
    • Fail
    if the answer is "oneOf [FLAG,FAIL]"

    Indicate which bolts were an issue and correct. Horse shoe bolts should be 30ft-lbs and secured with Vibratite

    All Brake fasteners present and marked?

    • Pass
    • Flag
    • Fail
    if the answer is "oneOf [FLAG,FAIL]"

    Which Brake assemblies failed this check?

    All Brake hoses secured with no leaks?

    • Pass
    • Flag
    • Fail
    if the answer is "oneOf [FLAG,FAIL]"

    Which Brake assemblies failed this check?

    All Brake gauges set between 4-6 bar?

    • Pass
    • Flag
    • Fail
    if the answer is "oneOf [FLAG,FAIL]"

    Which Brake assemblies failed this check?

    All Brake Chucks unlock/lock smoothly?

    • Pass
    • Flag
    • Fail
    if the answer is " "
    if the answer is "oneOf [FLAG,FAIL]"

    Which Brake assemblies failed this check?

    Open pneumatic panel for each brake assembly. Check the screw caps on the end of both solenoids. Are these caps tightly attached?

    • Yes
    • No
    • N / A
    if the answer is "oneOf [No]"

    Please inform which one was found loose...

    Manually slide the idler break assembly back and forth. Is motion smooth and consistent?

    • Pass
    • Flag
    • Fail
    if the answer is "oneOf [FLAG,FAIL]"

    Explain issue and with which brake assembly

    Unwind Stand Rollers

    Inspect the winder rollers within the unwind stands

    • IMG_0071.jpg

    All rollers are in good health?

    • Pass
    • Flag
    • Fail
    if the answer is "oneOf [FLAG,FAIL]"

    Indicate what damage was found

    All bearings are secure and functional

    • Pass
    • Flag
    • Fail
    if the answer is "oneOf [FLAG,FAIL]"

    Please indicate which bearing is failing or has failed

    Unwind Stand Pneumatic Checks

    Inspect the pneumatic components and hoses for issues

    • IMG_0065.jpg

    Are all fittings and hoses secure and not leaking?

    • Pass
    • Flag
    • Fail
    if the answer is "oneOf [FLAG,FAIL]"

    Indicate what component failed

    Are all cylinders secure and connected?

    • Pass
    • Flag
    • Fail
    if the answer is "oneOf [FLAG,FAIL]"

    Indicate what component failed

    Unwind Stand I/O Checks

    Checking sensors and cabling

    Wave your hand across each sensor to make sure it flags via its led indicator

    • Pass
    • Flag
    • Fail
    if the answer is "oneOf [FLAG,FAIL]"

    Indicate which sensor failed and correct

    Are all Cylinder reed switch LEDs reading current state?

    • Yes
    • No
    • N / A
    if the answer is "oneOf [No]"

    Indicate which reed switch is the issue can correct

    Are IO block connections secured and lights illuminating?

    • Yes
    • No
    • N / A
    if the answer is "oneOf [No]"

    Indicate which block was found with issue can correct

    Are wire way trays covered and keeping all plumbed wires in?

    • Yes
    • No
    • N / A
    if the answer is "oneOf [No]"

    Indicate which tray is compromised and correct

    Inspect the two stand control module for any damaged buttons, switches or lights

    • Pass
    • Flag
    • Fail
    if the answer is "oneOf [FLAG,FAIL]"

    Indicate which component is damaged and repair

    Any comments or feedback about this PM?

Source: CWT Henry - Fernley, NV (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.