Back
Manufacturing / Industrial • Inspections

ITW (Spraying cell) Bag melter daily Preventive Maintenance Checklist

This procedure outlines daily preventive maintenance tasks for the ITW bag melter system, focusing on temperature regulation, pump performance, air pressure, and adhesive flow. These checks ensure safe operation, maintain proper melt characteristics, and help prevent production interruptions due to leaks or component failure.
Seoyon E Hwa
07/04/2025

ITW (Spraying cell) Bag melter daily Preventive Maintenance Checklist

This procedure outlines daily preventive maintenance tasks for the ITW bag melter system, focusing on temperature regulation, pump performance, air pressure, and adhesive flow. These checks ensure safe operation, maintain proper melt characteristics, and help prevent production interruptions due to leaks or component failure.

    check the temperature of heating

    operating temp : up to max.190℃

    • picture1.png

    check the parameter of pumps

    adhesive pressure : up to max. 96bar pump speed : max. 70 rev / min

    • picture2.png

    check the pressure of air regulator

    • picture3.png

    check the leakage of air hose

    • picture4.png

    check the leakage of adhesives

    • picture5.png

    check the condition of feeding line

    • picture6.png
Source: Seoyon E Hwa (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.