Heat Detector w/ Key - Monthly Testing
This inspection is used to verify the proper operation of heat detectors associated with the BYSTRONIC PRESS BRAKE. Complete all testing steps, document any issues found, and ensure the equipment is returned to normal operating condition after testing.
Oshkosh Defense - Harrion St
06/08/2026
Heat Detector w/ Key - Monthly Testing
This procedure outlines the steps for monthly testing of heat detectors associated with the BYSTRONIC PRESS BRAKE. It includes pre-test inspections, functional testing, and post-test actions to ensure the detector is operational and any issues are documented.
Asset Information: 65080 - BYSTRONIC PRESS BRAKE
Preperation
*Safety Glasses *Steel Toe Boots or Shoes *Hearing protection if required *Lockout Tagout as Required *Appropriate Gloves *Safety Harness
*Scissors Lift *Fall protection harness *Heat Gun
*Obtain key from lock box Harrison: Key #100
Functional Test
While Using heat gun, Did the Asset shut down?
With Heat gun carefully warm up heat sensor(s) YES= Red light on panel will illuminate if sensor is working. NO= There is and issue with the heat detector N/A= there is not option for this
if the answer is "oneOf [No]"
Inform Supervisor
Final Checks
* Re-install any Panels or components that were removed during maintenance. * Remove Lockout Tagout (As Necessary) * Energize all power sources (As Necessary) * Return Asset to Operating Condition (As Necessary) * Visually confirm that equipment powered on as intended *Turn off pump
Technician's Signature
By signing this form, you acknowledge that you have completed the Work Order to the best of your ability.
Click here to sign
Source: Oshkosh Defense - Harrion St (Community Member)