Splicing Wrap Rolls

Preparing new roll

• mount the new roll on the spindle

• Cut the new roll straight across at the registration mark

• Align the wrap rolls correctly using measuring device

Preparing the splice

• measure out the bottom splicing tape to 1-2" wider than the roll and stick it to the roll with adhesive facing out

• Measure out the top splicing tape close to the width of the roll and stage close to the splicing area

Roll Change Over

• Stop the machine ensuring there is enough slack on the butt roll to reach the new roll

• Release the tension from the butt roll

• cut the butt roll straight across at the registration mark

Splicing

• Align the flap from the butt roll to the new roll at the registration mark

• stick the materials together and fold the excess tape to the top to secure the roll

• Add pre-cut top tape as re-enforcement

Re-start

• Take up the slack from the web

• Set roll brake tension at the appropriate setting

• Run the machine slower and ensure proper function before getting up to running speed

Dispose of any waste materials properly

Record any issues encountered during training

Trainer's initials

Trainee's signature