Back
Manufacturing / Industrial • Inspections

Racking Audit Monthly Inspection

This procedure involves a monthly inspection of maintenance racking to identify any new damage. The inspection covers load capacity visibility, footplate and anchor security, upright column integrity, brace condition, beam connector verification, rack alignment, decking condition, and protection of critical areas. If damage is found, a high priority safety work order should be created and assigned to Rachael Marzec and Justin Darcy for repairs or replacement.
Amcor - Greenville
12/15/2025

Racking Audit Monthly Inspection

This procedure involves a monthly inspection of maintenance racking to identify any new damage. The inspection covers load capacity visibility, footplate and anchor security, upright column integrity, brace condition, beam connector verification, rack alignment, decking condition, and protection of critical areas. If damage is found, a high priority safety work order should be created and assigned to Rachael Marzec and Justin Darcy for repairs or replacement.

    Rack Load Capacity

    Is the rack load capacity clearly identified and visible?

    • Yes
    • No
    • N / A

    Footplates and Anchors

    Are the front and back footplates on the uprights anchored (e.g., bolted to the floor)?

    • Yes
    • No
    • N / A

    Are the anchors still secured to the floor?

    • Yes
    • No
    • N / A

    Are any footplates twisted greater than ½” or sheered?

    • Yes
    • No
    • N / A

    Upright Columns

    Are the front and back upright columns damaged (severe bends, twists, rips)?

    • Yes
    • No
    • N / A

    Is there > 1/2-inch column deflection in any direction of the column uprights?

    • Yes
    • No
    • N / A

    Braces

    Are there any missing, detached, ripped, or torn horizontal or diagonal braces?

    • Yes
    • No
    • N / A

    Is there > 1/2-inch deflection in any of the horizontal or diagonal braces?

    • Yes
    • No
    • N / A

    Beam Connector Verification

    Beam connector verification

    Is there > 1/2-inch deflection on any beams?

    • Yes
    • No
    • N / A

    Rack Alignment

    Are Racks plumb and straight - no more than 1/2 inch per 10 feet of vertical height?

    • Yes
    • No
    • N / A

    Rack Decking

    Rack Decking

    Protection of Critical Areas

    Are critical areas of racks protected from damage?

    • Yes
    • No
    • N / A

    Safety Work Order

    Create a high priority safety work order for repairs/replacement if damage is found. Assign to Rachael Marzec and Justin Darcy

Source: Amcor - Greenville (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.