Back

Overhead Crane Monthly Checklist

A crane safety checklist is used to ensure that crane equipment is of safe use and is compliant to legal regulations and standards. Use this checklist for inspecting tower cranes before, during and after operational shifts.
2 MX Main Demo
01/24/2023

Overhead Crane Monthly Checklist

A crane safety checklist is used to ensure that crane equipment is of safe use and is compliant to legal regulations and standards. Use this checklist for inspecting tower cranes before, during and after operational shifts.

    Hook Inspection

    Hook is in good condition and show no sign of cracks?

    • Pass
    • Flag
    • Fail

    Hook is in good condition and show no sign of elongation or deformation?

    • Pass
    • Flag
    • Fail

    Is retainer spring present?

    • Pass
    • Flag
    • Fail

    Does retainer spring function properly?

    • Pass
    • Flag
    • Fail

    Controls

    Is there adequate support against strain?

    • Pass
    • Flag
    • Fail

    Are identification/labels clearly present?

    • Pass
    • Flag
    • Fail

    Are Warner Labels/decals clearly present?

    • Pass
    • Flag
    • Fail

    Is the General condition good?

    • Pass
    • Flag
    • Fail

    Chain

    Chain is in good condition and has adequate lubrication?

    • Pass
    • Flag
    • Fail

    Chain is in good condition and shows no signs of wear and tear?

    • Pass
    • Flag
    • Fail

    Is the chain excessively stretched?

    • Pass
    • Flag
    • Fail

    Wire Rope

    Wire rope is in good condition and shows no sign of distortion?

    • Pass
    • Flag
    • Fail

    Wire rope is in good condition and shows no sign of corrosion?

    • Pass
    • Flag
    • Fail

    Wire rope is in good condition and shows no sign of broken wires or cuts?

    • Pass
    • Flag
    • Fail

    Wire rope is in good condition and shows no sign of reeving?

    • Pass
    • Flag
    • Fail

    Structure

    Is the load rating properly marked?

    • Pass
    • Flag
    • Fail

    Is the load indicator over its full range?

    • Pass
    • Flag
    • Fail

    General structure is in good condition with no signs of defects, cracks, or welds.

    • Pass
    • Flag
    • Fail

    Is the air system working properly?

    • Pass
    • Flag
    • Fail

    Is the hydraulic system working properly?

    • Pass
    • Flag
    • Fail

    Bridge

    Bridge is in good condition and shows no signs of wear or defects?

    • Pass
    • Flag
    • Fail

    Trolley

    Trolley is in good condition and shows no signs of wear or defects?

    • Pass
    • Flag
    • Fail

    Hoist

    Hoist is in good condition and shows no signs of wear or defects?

    • Pass
    • Flag
    • Fail

    Electrical Apparatus

    Are there signs of pitting or any deterioration of controller contactors?

    • Pass
    • Flag
    • Fail

    Are there signs of pitting or any deterioration of limit switches?

    • Pass
    • Flag
    • Fail

    Are there signs of pitting or any deterioration of pushbutton stations?

    • Pass
    • Flag
    • Fail

    Pins, Bearings, Shafts, Gears, Rollers, Locking and Clamping Devices

    Are these parts worn, cracked or distorted? (If yes, indicate which in the comments)

    • Pass
    • Flag
    • Fail

    Signature Please

    Click here to sign
Source: 2 MX Main Demo (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.