Treater Preventive Maintenance Checklist
This procedure provides a full preventive maintenance checklist for treater equipment, focusing on cleaning, inspecting, and servicing electrical and mechanical components. It ensures wiring, transformers, rollers, sensors, and safety systems are in good condition to prevent arcing and maintain safe operation.
Amcor - PRY
08/22/2025
Treater Preventive Maintenance Checklist
This procedure provides a full preventive maintenance checklist for treater equipment, focusing on cleaning, inspecting, and servicing electrical and mechanical components. It ensures wiring, transformers, rollers, sensors, and safety systems are in good condition to prevent arcing and maintain safe operation.
LOCKOUT/TAGOUT PROCEDURES MUST BE FOLLOWED AT ALL TIMES
APPROPRIATE PPE MUST BE WORN AT ALL TIMES
CHECK ALL ELECTRICAL CONNECTORS INSIDE TREATER, CLEAN, IF ANY CONNECTION IS FOUND TO BE DAMAGED, REPAIR AS REQUIRED
CHECK HIGH BOLTAGE WIRE FROM TRANSFORMER TO THE KEYS FOR HOT SPOTS AND WEAR, REPAIR AS REQUIRED
VERIFY THAT HIGH VOLTAGE WIRE ENDS ARE TIGHT, REPAIR AS REQUIRED
CHECK HIGH VOLTAGE TRANSFORMER ON THE SIDE OF THE TREATER FOR OIL LEAKS, CLEAN, REPAIR AS REQUIRED
CHECK TREATER FOR MISSING DOORS, LATCHES, CONNECTORS, ETC. REPAIR AS REQUIRED
CHECK OPEN AND CLOSE FUNCTION OF TREATER BOX, REPAIR AS REQUIRED
CHECK FOR PROPER OPERATION POF DOOR INTERLOCK SWITCHES, IF APPLICABLE, REPAIR AS REQUIRED
CHECK SPEED SENSORS FOR PROPER OPERATION, REPAIR AS REQUIRED
CHECK VENT DUCTING FOR HOLES, AS APPLICABLE, REPAIR AS REQUIRED
INSPECT ROLLER COVERS FOR DAMAGE, SPOTS THAT WOULD CAUSE ARCING, REPLACE AS REQUIRED
CHECK ALL TREATER ROLLER BEARINGS FOR CONDITION, SMOOTH OPERATION, REPLACE AS REQUIRED
CHECK ALL SAFETIES SWITHCHES AND E-STOPS, REPAIR AS REQUIRED. DO NOT RUN EQUIPMENT IF SAFETY OF E-STOP IN NON-FUNCTIONING
COMMENT
DATE
TECHNICIAN SIGNATURE
Click here to sign
Source: Amcor - PRY (Community Member)