WOLVERINE PRINTER PREVENTIVE MAINTENANCE

Inspect Printer drive motor brushes are not overly worn

• Brushes are ok

• Brushes replaced

Inspect Chiller drive motor brushes are not overly worn

• Brushes are ok

• Brushes replaced

Inspect red spindle drive motor brushes are not overly worn

• Brushes are ok

• Brushes replaced

Inspect blue spindle drive motor brushes are not overly worn

• Brushes are ok

• Brushes replaced

Print section drive belt condition

• Pass
• Flag
• Fail

Chill section drive belt condition

• Pass
• Flag
• Fail

Red spindle section drive belt condition

• Pass
• Flag
• Fail

Blue spindle section drive belt condition

• Pass
• Flag
• Fail

Print Section Check main lubrication system is operational and all points of lubrication are receiving lubricant.

• Pass
• Flag
• Fail

Print Section Inspect all drive gears for damage or excessive wear

• Pass
• Flag
• Fail

PRINT DECT 1

• LUBRICATE ALL BEARINGS

• INSPECT ANILOX DRIVE GEAR

• INSPECT ANILOX AGITATE HYDRAULIC MOTOR AND HOSES

• INSPECT AND LUBRICATE MAIN ACME SCREW AND IMPRESSION ACME SCREW

• INSPECT DOCTOR BLADE CHAMBER FOR DAMAMGE

• INSPECT IMPRESSION HYDRASULIC CYLINDERS AND HOSES FOR LEAKS AND FUNCTION

• INSPECT IMPRESION ROLLER AND GEAR FOR DAMAGE

• GREASE IMPRESION ROLLER BEARINGS

• LUBRICATE DECK SLIDE ASSEMBLIES

• INSPECT ALL GUARDS ARE IN GOOD ORDER AND IN PLACE.

PRINT DECT 2

• LUBRICATE ALL BEARINGS

• INSPECT ANILOX DRIVE GEAR

• INSPECT ANILOX AGITATE HYDRAULIC MOTOR AND HOSES

• INSPECT AND LUBRICATE MAIN ACME SCREW AND IMPRESSION ACME SCREW

• INSPECT DOCTOR BLADE CHAMBER FOR DAMAMGE

• INSPECT IMPRESSION HYDRASULIC CYLINDERS AND HOSES FOR LEAKS AND FUNCTION

• INSPECT IMPRESION ROLLER AND GEAR FOR DAMAGE

• GREASE IMPRESION ROLLER BEARINGS

• LUBRICATE DECK SLIDE ASSEMBLIES

• INSPECT ALL GUARDS ARE IN GOOD ORDER AND IN PLACE.

PRINT DECT 3

• LUBRICATE ALL BEARINGS

• INSPECT ANILOX DRIVE GEAR

• INSPECT ANILOX AGITATE HYDRAULIC MOTOR AND HOSES

• INSPECT AND LUBRICATE MAIN ACME SCREW AND IMPRESSION ACME SCREW

• INSPECT DOCTOR BLADE CHAMBER FOR DAMAMGE

• INSPECT IMPRESSION HYDRASULIC CYLINDERS AND HOSES FOR LEAKS AND FUNCTION

• INSPECT IMPRESION ROLLER AND GEAR FOR DAMAGE

• GREASE IMPRESION ROLLER BEARINGS

• LUBRICATE DECK SLIDE ASSEMBLIES

• INSPECT ALL GUARDS ARE IN GOOD ORDER AND IN PLACE.

PRINT DECT 4

• LUBRICATE ALL BEARINGS

• INSPECT ANILOX DRIVE GEAR

• INSPECT ANILOX AGITATE HYDRAULIC MOTOR AND HOSES

• INSPECT AND LUBRICATE MAIN ACME SCREW AND IMPRESSION ACME SCREW

• INSPECT DOCTOR BLADE CHAMBER FOR DAMAMGE

• INSPECT IMPRESSION HYDRASULIC CYLINDERS AND HOSES FOR LEAKS AND FUNCTION

• INSPECT IMPRESION ROLLER AND GEAR FOR DAMAGE

• GREASE IMPRESION ROLLER BEARINGS

• LUBRICATE DECK SLIDE ASSEMBLIES

• INSPECT ALL GUARDS ARE IN GOOD ORDER AND IN PLACE.

Dryer / OVEN

• grease Dryer tunnel roller bearings

• Replace burner supply air filters

• test burner for all safeties

• open and blow out pilot gas line

Chill section

• Inspect chill roller rotary unions for leaks

• inspect chill roll drive belts

• inspect chill rolls for damage

• Grease all bearings

Winder

• Inspect Winder Turret gear box oil level

• inspect turret gear box for oil leaks

• inspect and adjust turret motor stern brake as needed.

• Inspect all spindle drive shafts have not slipped

• inspect all safety chucks are working correctly.

Corona treater

• Inspect treater sleeve for damage

• lubricate all bearings

• inspect electrode.

• Test all treater switches are operational

• test treater air pressure switch working properly.

• inspect and blow out treater control cabinet.

PRINTER SECTION Hydraulic power unit

• Change hydraulic oil

• change hydraulic filter

• clean unit

• inspect all valves and hoses for leaks

• clean drip pan

LED UV system

• inspect all led lamps

• inspect Chiller and coolant levels

• ensure all lamp locking points are in good service order