Back
Manufacturing / Industrial • Inspections

Die Cleaner Preventive Maintenance

This procedure ensures the Die Cleaner operates safely and reliably by verifying the condition of its key components on a bi-weekly basis.
Lightera
02/06/2026

Die Cleaner Preventive Maintenance

This procedure outlines the bi-weekly preventive maintenance of the Die Cleaner, including draining and refilling the boil tank, cleaning the heater and y-strainer, and inspecting the sight tube.

    Drain the Boil Tank

    Ensure all liquid is drained from the tank

    • Yes
    • No
    • N / A

    Heater Maintenance

    Brush the heater to remove any debris

    • Pass
    • Flag
    • Fail

    Remove any solids from the heater area

    • Pass
    • Flag
    • Fail

    Y-Strainer Cleaning

    Clean the y-strainer thoroughly

    • Pass
    • Flag
    • Fail

    Sight Tube Inspection

    Inspect the sight tube for any damage or wear

    • Pass
    • Flag
    • Fail

    Replace the sight tube if necessary

    • Yes
    • No
    • N / A

    Fill the Boil Tank

    Fill the boil tank to the required level

    Meter name
    Unit
Source: Lightera (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.