AM Print Room Daily Inspection Checklist
This checklist is designed for daily inspection of the print room AM printers. Focusing on HVAC, track/service, chiller/fluid, and equipment/mechanical aspects. It ensures all systems are functioning correctly and identifies any anomalies for immediate attention.
AM Print Room Daily Inspection Checklist
The aim of this checklist is to assess the print room’s condition and readiness at the start of the day, supporting a clean, organized, and safe working environment. It helps identify equipment issues, housekeeping concerns, and supply shortages early, allowing timely corrective action and reducing disruptions to printing activities.
Facility / HVAC
Check that all facility valves are open / in proper state (Inert gas, CDA, Coolant water Inlet/Return)
Verify chillers are at correct setpoint (20°C) and are in 'RUN' state
Track / Service
Ensure service key at end of track is set to 0 (unless service work is actively being performed)
Check gate door interlock is properly secured
Chiller / Fluid
Check Main chiller fill level
Check Optic chiller fill level
Ensure no coolant fluid is leaking from lines or around chillers
Equipment / Mechanical
Listen for odd sounds from gas pump or tank connections (loose CDA fittings or lines)
Verify machine status light is working and is illuminated green — if red light, why?
Note any anomalies (e.g., “chiller setpoint off,” “loose CDA line,” “red light on status”)
Source: Divergent 3D (Community Member)
