Back
Manufacturing / Industrial • Inspections

Monthly Hydraulic Press Brake Maintenance

This procedure ensures the hydraulic press brake operates safely and reliably by verifying the condition of its key components on a monthly basis.
Roll Offs USA
02/04/2026

Monthly Hydraulic Press Brake Maintenance

This procedure outlines the monthly maintenance tasks for the hydraulic press brake, including lubrication, cleaning, and inspection of the ram guides, leveling system, and reservoir, to ensure consistent bending accuracy and reliable operation.

    Lubricate cylinder clevis pin(s)

    • Pass
    • Flag
    • Fail

    Clean and flush ram guides with oil

    • Pass
    • Flag
    • Fail

    Check for water in reservoir(s)

    • Yes
    • No
    • N / A

    Wipe entire machine clean

    • Pass
    • Flag
    • Fail

    Check leveling system

    • Pass
    • Flag
    • Fail

    Check reservoir oil level(s) everyday

    • Pass
    • Flag
    • Fail

    Check lubrication at both guides everyday

    • Pass
    • Flag
    • Fail

    Clean leveling band every 1 week

    • Pass
    • Flag
    • Fail

    Lubricate stroke adjustment and tilt adjustment screws every 1 week

    • Pass
    • Flag
    • Fail

    Sign off on the monthly hydraulic press brake maintenance

    Click here to sign
Source: Roll Offs USA (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.