MPP-Sycamore dock inspection
Use this checklist to inspect the shipping and receiving docks and confirm that the equipment is safe and working properly before trailers are loaded or unloaded.
MPP-Sycamore dock inspection
This procedure covers the inspection of the shipping and receiving docks, including the dock plates, dock locks and trailer restraints, red/green indicator lights, trailer stands, and wheel chocks. It confirms that each component is undamaged, operates properly, and is used according to company procedure.
Section #1
dock plate free of damage
hinges and pivot points in good condition
dock plate moves freely and operates properly
pull chain moves freely and operates properly
dock plate lip properly engages trailer
dock plate returns to properly stored position
DOCK LOCKS TRAILER RESTRAINTS
dock lock free of visible damage no missing parts
dock lock operates properly
restraint properly engages DOT bar/approved restraint point
lock securely holds trailer when engaged
lock releases properly when authorized
RED/GREEN DOCK INDICATOR LIGHTS
exterior red and green lights operational
interior red and green lights operational
lights correctly indicate status of trailer
TRAILER STANDS
INSPECTION OF OUTSIDE STANDS AND CHOCKS
Trailer stands present and in place on all docks
Stands in good condition with no damage
Stands being used properly and per company procedure
WHEEL CHOCKS
Wheel chocks available at all docks
Chocks in good condition no damage
Chocks being used properly per company procedure
Source: MPP Sycamore (Community Member)
