Back

Bench grinder - Monthly

This procedure outlines the monthly inspection and maintenance tasks for the bench grinder. Follow manufacturer instructions and site isolation requirements, document findings, and address any unsafe conditions before returning the grinder to service.
Oshkosh Defense - South Campus
11/19/2026

Bench grinder - Monthly

The aim of this procedure is to maintain the bench grinder in safe, reliable operating condition through monthly inspection and preventive maintenance. It helps identify wheel damage, wear, loose components, and defects affecting guards, tool rests, and operation, supporting timely corrective action and reducing unexpected equipment failures.

    Preparation

    * Safety Glasses * Steel Toe boots / shoes * Hearing Protection (if required in area) * Appropriate gloves (as necessary) * Lock Out / Tag Out (as necessary)

    - General Tool Bag - Rags

    LOTO Review

    Verify LO/TO procedure is posted on equipment

    Fail - no LO/TO posted

    • Pass
    • Flag
    • Fail

    Verify LO/TO procedure accurate

    Fail - procedure needs to be updated, Work Order will be sent to Safety Specialist to review

    • Pass
    • Flag
    • Fail

    Maintenance Shop bench grinder

    Inspect grinding wheels for even wear

    Flag - repair less than 30 mins. - perform repair Fail - repair greater than 30 mins. (Separate Corrective Action WO will be generated)

    • Pass
    • Flag
    • Fail

    Rests should be 1/8" away from Stone

    Inspect wheels for cracks or damage

    Flag - Replace wheel immediately if cracks or damage found Fail - Wheels not available - Lock out Grinder until replaced

    • Pass
    • Flag
    • Fail

    Inspect safety guards are in good condition and in place

    Flag - Replace wheel immediately if cracks or damage found Fail - Wheels not available - Lock out Grinder until replaced

    • Pass
    • Flag
    • Fail

    Repro bay 2 grinder

    Inspect grinding wheels for even wear

    Flag - repair less than 30 mins. - perform repair Fail - repair greater than 30 mins. (Separate Corrective Action WO will be generated)

    • Pass
    • Flag
    • Fail

    Rests should be 1/8" away from Stone

    Inspect wheels for cracks or damage

    Flag - Replace wheel immediately if cracks or damage found Fail - Wheels not available - Lock out Grinder until replaced

    • Pass
    • Flag
    • Fail

    Inspect safety guards are in good condition and in place

    Flag - Replace wheel immediately if cracks or damage found Fail - Wheels not available - Lock out Grinder until replaced

    • Pass
    • Flag
    • Fail

    Final Checks

    * Re-install any Panels or components that were removed during maintenance. * Remove Lockout Tagout (As Necessary) * Energize all power sources (As Necessary) * Return Asset to Operating Condition (As Necessary) * Visually confirm that equipment powered on as intended

    Cab line rework area

    Inspect grinding wheels for even wear

    Flag - repair less than 30 mins. - perform repair Fail - repair greater than 30 mins. (Separate Corrective Action WO will be generated)

    • Pass
    • Flag
    • Fail

    Rests should be 1/8" away from Stone

    Inspect wheels for cracks or damage

    Flag - Replace wheel immediately if cracks or damage found Fail - Wheels not available - Lock out Grinder until replaced

    • Pass
    • Flag
    • Fail

    Inspect safety guards are in good condition and in place

    Flag - Replace wheel immediately if cracks or damage found Fail - Wheels not available - Lock out Grinder until replaced

    • Pass
    • Flag
    • Fail

    Cargo body build area

    Inspect grinding wheels for even wear

    Flag - repair less than 30 mins. - perform repair Fail - repair greater than 30 mins. (Separate Corrective Action WO will be generated)

    • Pass
    • Flag
    • Fail

    Rests should be 1/8" away from Stone

    Inspect wheels for cracks or damage

    Flag - Replace wheel immediately if cracks or damage found Fail - Wheels not available - Lock out Grinder until replaced

    • Pass
    • Flag
    • Fail

    Inspect safety guards are in good condition and in place

    Flag - Replace wheel immediately if cracks or damage found Fail - Wheels not available - Lock out Grinder until replaced

    • Pass
    • Flag
    • Fail

    Technician Signature

    By signing this form, you acknowledge that you have completed the Work Order to the best of your ability.

    Click here to sign

    S7405

    Inspect grinding wheels for even wear

    Flag - repair less than 30 mins. - perform repair Fail - repair greater than 30 mins. (Separate Corrective Action WO will be generated)

    • Pass
    • Flag
    • Fail

    Rests should be 1/8" away from Stone

    Inspect wheels for cracks or damage

    Flag - Replace wheel immediately if cracks or damage found Fail - Wheels not available - Lock out Grinder until replaced

    • Pass
    • Flag
    • Fail

    Inspect safety guards are in good condition and in place

    Flag - Replace wheel immediately if cracks or damage found Fail - Wheels not available - Lock out Grinder until replaced

    • Pass
    • Flag
    • Fail
Source: Oshkosh Defense - South Campus (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.