Back

C900x Inspection

Regular testing and inspection will help to maximise battery life. A routine inspection at least once a month is recommended to maintain optimum performance.
AZ Revlon
09/22/2022

C900x Inspection

Regular testing and inspection will help to maximise battery life. A routine inspection at least once a month is recommended to maintain optimum performance.

    Filling Station Inspection

    Check vertical adjustment bolts

    • Pass
    • Flag
    • Fail

    Check nut on cylinder rod

    • Pass
    • Flag
    • Fail

    Check temperature of vessel using a laser thermometer

    • Pass
    • Flag
    • Fail

    Check for distillate leaking from vessel to syringes

    • Pass
    • Flag
    • Fail

    Check linear bearings for wear or lack of lubricant

    • Pass
    • Flag
    • Fail

    Check for air leaks

    • Pass
    • Flag
    • Fail

    Capping Station Inspection

    Check vertical adjustment bolts

    • Pass
    • Flag
    • Fail

    Check nut on cylinder rod

    • Pass
    • Flag
    • Fail

    Check plungers for loose or tight springs

    • Pass
    • Flag
    • Fail

    Check for air leaks

    • Pass
    • Flag
    • Fail

    Check linear bearings for wear or lack of lubricant

    • Pass
    • Flag
    • Fail

    Check clamp rubber pieces are not worn/missing

    • Pass
    • Flag
    • Fail

    Unloading Station Inspection

    Check vertical adjustment bolts

    • Pass
    • Flag
    • Fail

    Check nut on cylinder rod

    • Pass
    • Flag
    • Fail

    Check plungers for loose or tight springs

    • Pass
    • Flag
    • Fail

    Check for air leaks

    • Pass
    • Flag
    • Fail

    Check linear bearings for wear or lack of lubricant

    • Pass
    • Flag
    • Fail

    Check clamps for worn or missing rubber mat

    • Pass
    • Flag
    • Fail

    Overall Inspection

    Check conveyor belt for tracking or wear

    • Pass
    • Flag
    • Fail

    Check lift up table

    • Pass
    • Flag
    • Fail

    Check conveyor pulleys and belt

    • Pass
    • Flag
    • Fail

    Check Estop, stop, and start buttons

    • Pass
    • Flag
    • Fail

    Check movements for any sticking on cylinders and bearings

    • Pass
    • Flag
    • Fail
Source: AZ Revlon (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.