Back

03. TPM Press Task - Inspect Die Oiler and Lubricator, Lines, and Injectors. Check Condition of Level Switch - Monthly

This is for the routine maintenance activity for your equipment aimed at ensuring the proper functioning and reliability of die oiler and lubrication systems in press machinery.
MiTek
04/18/2024

03. TPM Press Task - Inspect Die Oiler and Lubricator, Lines, and Injectors. Check Condition of Level Switch - Monthly

This is for the routine maintenance activity for your equipment aimed at ensuring the proper functioning and reliability of die oiler and lubrication systems in press machinery.
Procedure Max Score: 14

    *Air on press turned off

    Visually inspect oil/grease level of press (add oil/grease as needed).

    • Pass
    • Flag
    • Fail

    Visually check the system for faults, if press is fitted with grease system.

    • Pass
    • Flag
    • Fail

    Visually check all oil/grease lines external of press.

    • Pass
    • Flag
    • Fail

    Open die doors.

    Blow out debris with air away from oil distribution block (oil system only), injectors, and fittings.

    Visually inspect block and injectors for active leaks (notify maintenance if leaks found).

    • Pass
    • Flag
    • Fail

    Visually inspect all oil/grease fittings and lines for damage.

    • Pass
    • Flag
    • Fail

    Are the lines properly inserted into the fittings?

    • Pass
    • Flag
    • Fail

    Are the lines properly inserted into the fittings?

    • Pass
    • Flag
    • Fail

    If no issues, close doors and prepare for operation of press.

    Signature of Inspector

    Click here to sign

    Date and Recording

Source: MiTek (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.