Champion Compressor Touchscreen Navigation and Alarm Check
Navigating the Champion compressor controller touchscreen to check the home screen status, open the menu, access the Alarms section, review active alarms, and return to the home screen.
Champion Compressor Touchscreen Navigation and Alarm Check
The aim of this procedure is to support accurate navigation of the Champion compressor’s touchscreen interface and the review of operating information and alarm status. It helps personnel identify active alarms, understand displayed conditions, and document issues requiring attention, supporting reliable operation and timely troubleshooting.
Menu Navigation
Open the touchscreen menu and navigate to the Alarms section.
Tap the Menu button on the left side of the touchscreen. The menu panel slides out showing options: Home, Settings, Alarms, Diagnostics, Trends, Language.
Tap the Alarms icon (bell) in the menu sidebar. Sub-options appear: Active Alarms and Alarm History.
Select "Active Alarms" from the Alarms sub-menu to open the active alarms screen.
Active Alarms Review
Review the Active Alarms screen for any current alarms and interact with alarm controls.
Check Active Alarms table for entries
Review the Active Alarms table (columns: Alarm, Timestamp, Code, Message). Confirm whether any active alarms are listed. The table appears empty in this check.
Press the "Alarm History" button at the bottom of the Active Alarms screen to review past alarm records.
Press the "Reset All" button on the Active Alarms screen to clear any latched alarms.
Tap the Menu button again from the Active Alarms screen to access navigation options.
Return to Home Screen
Navigate back to the home screen and confirm final status.
Tap the Home icon in the menu sidebar to return to the main home screen.
Source: Direct Wire and Cable (Community Member)








