Back

Production Machine Tool SAMI Semi-Annual PM

This procedure outlines the semi-annual preventive maintenance tasks for the SAMI production machine tool. Follow manufacturer instructions and site isolation requirements, complete the applicable inspections and servicing, and document findings and required corrective actions.
24P DC Columbus - Cintas
11/17/2026

Production Machine Tool SAMI Semi-Annual PM

The aim of this procedure is to maintain the SAMI production machine tool in reliable operating condition through preventive maintenance every six months. It helps identify wear, damage, lubrication issues, and developing faults, supporting consistent machining performance, reduced unexpected downtime, and extended equipment service life.

    Lock Out Tag Out

    LOTO Performed

    Food Safety Pre-Check

    Machine Observation

    Check all mounts, bumper guards, and light covers.

    • Pass
    • Flag
    • Fail

    Check counter beam alignment, and fiber optic sensor in the back. Check sensor alignment and integrity.

    • Pass
    • Flag
    • Fail

    Make sure counter works properly.

    • Pass
    • Flag
    • Fail

    Check lights for proper operation. Check for cracked or broken mirror.

    • Pass
    • Flag
    • Fail

    Check adjustability.

    • Pass
    • Flag
    • Fail

    Check quality of reflector strip.

    • Pass
    • Flag
    • Fail

    Check cabinets; they should be clean and have all conductors neatly arranged. Check light fixture housings for grommets where the w Knicks in the wiring. Check power cord for cuts and Knicks. Also ensure Velcro is used to suspend power cord.

    • Pass
    • Flag
    • Fail

    Clean Entire machine of Linen, dirt, debris etc. Touch up areas of rust and paint failure.

    • Pass
    • Flag
    • Fail

    Clean sensor lenses.

    • Pass
    • Flag
    • Fail

    Repair made or needed.

    Food Safety Post-Check

Source: 24P DC Columbus - Cintas (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.