Plumbing Hazard Checklist

Date:

Inspector(s):

Job Title:

Chair:

Signature:

Are electrical safety procedures posted and enforced? Are protocols in place for PPE? Are there signs of safety rules posted? Is there adequate training? Are there any “no food or drink” signs? Is there an eyewash station located there?

• Yes
• No
• N / A

COMMENTS:

PERSON RESPONSIBLE FOR ACTION

DATE ACTION COMPLETED

Are tool rest gap set to proper height? Is the grinder stone in good condition? Is a face shield located at grinder?

• Yes
• No
• N / A

COMMENTS:

PERSON RESPONSIBLE FOR ACTION

DATE ACTION COMPLETED

COMMENTS:

- Is safety training and supervision provided?

• Yes
• No
• N / A

PERSON RESPONSIBLE FOR ACTION

DATE ACTION COMPLETED

All pipes stored in appropriate racks? Are all materials stored in a safe and proper manner?

• Yes
• No
• N / A

Comments:

PERSON RESPONSIBLE FOR ACTION

DATE ACTION COMPLETED

Are all hand tools in good condition? Are they stored in a safe manner when not in use? Is there safety training in their use?

• Yes
• No
• N / A

Comments:

PERSON RESPONSIBLE FOR ACTION

DATE ACTION COMPLETED

Are all gas cylinders clearly labeled? Are they stored in proper secure location? Is MSDS available for all gas cylinders? Is safety training provided?

• Yes
• No
• N / A

Comments:

PERSON RESPONSIBLE FOR ACTION

DATE ACTION COMPLETED

Are all flammables stored outdoors in a proper approved flammable cabinet? Are all flammables clearly labeled? Is MSDS available for all flammables?

• Yes
• No
• N / A

Comments:

PERSON RESPONSIBLE FOR ACTION

DATE ACTION COMPLETED

Is there adequate training and supervision? Is there sufficient ventilation?

• Yes
• No
• N / A

Comments:

PERSON RESPONSIBLE FOR ACTION

DATE ACTION COMPLETED

Are chemicals clearly labeled? Are they stored in a safe and proper storage cabinet?

• Yes
• No
• N / A

Comments:

PERSON RESPONSIBLE FOR ACTION

DATE ACTION COMPLETED

Are all floor area clear and free of grease/ other spills? There are no flammables lying around on the floor?

• Yes
• No
• N / A

Comments:

PERSON RESPONSIBLE FOR ACTION

DATE ACTION COMPLETED

Is the eyewash easily accessible? Does the eyewash work properly?

• Yes
• No
• N / A

Comments:

PERSON RESPONSIBLE FOR ACTION

DATE ACTION COMPLETED

Has ladder been inspected before use? Is there a spotter for persons on ladder? Is the ladder tied off when over 10 ft.?

• Yes
• No
• N / A

Comments:

PERSON RESPONSIBLE FOR ACTION

DATE ACTION COMPLETED

General Issues to Always Look For

• Cords: Damaged extension cords, chains of extension cords, Male prong missing, proper wire size

• Lockouts: when doing work on any piece of power equipment, proper precautions must be taken to ensure the power source has been eliminated and locked out. If it’s just a matter of unplugging the cord from the wall, the individual doing the work must have a constant view of the unplugged cord.

• Safe work procedures: safe work procedures must be readily available at all times

• Spills: ensure anything spilled has been cleaned up to avoid slipping hazards and exposure, a procedure should be in place to remedy accidental spills

• Work benches: work space on benches should be adequate to work safely

• Walkways: designated walk ways and safety areas should be clearly marked

• Combustibles: a collection of combustible materials such as oil rags, cardboard or garbage should be eliminated

• Equipment: equipment used must be certified and in good working condition. Anything broken should be flagged and not used.

• PPE: requirement signs should be posted on doors to shops and requirements MUST be enforced

• Training: all students need to be trained on any safety issues and equipment they are expected to use. It is a good idea to also do a follow up refresher training mid term.

• Eyewash: eyewashes should be flushed often to avoid dirt build up and to ensure they are working adequately

• Distraction: it is crucial to ensure students are totally focused on their tasks. All distractions should be avoided.

• Containers: any container that holds chemicals MUST be properly labeled and stored

• High hazard areas should be clearly marked and identified, either with signs or floor taping

• A program for servicing and preventive maintenance should be in place

• Signs: relevant warning signs relating to ALL workshop hazards should be displayed

• Waste: waste materials should be stored appropriately, and a procedure should be in place to legally dispose of the waste

• Housekeeping – if upon inspection you notice that lighting is not adequate, doors don’t close properly, or something is damaged, make note of it to ensure the right people are informed

• Clutter – walkways, doorways and places where hazardous materials are stored should be free of clutter to avoid trips etc.