Monthly PM Paint

Ensure safety measures are in place

• Lock out/tag out air supply before servicing

• Relieve all system pressure

Inspect air supply system components

• Inspect air hose for cracks, abrasion, soft spots, or leaks

• Check air connections, fittings, and quick disconnects for leaks

• Verify air regulator operates smoothly and maintains set pressure

• Inspect air filter/water separator and drain moisture if present

• Listen for abnormal air leaks during operation

Air Supply System Inspection

• Pass
• Flag
• Fail

Notes

Add pictures if any flags or fail issues

Inspect paint pump components

• Inspect pump body for leaks, cracks, or paint buildup

• Check seals, packings, and manifold areas for signs of wear or leakage

• Verify pump cycles smoothly without hesitation or chatter

• Inspect mounting hardware and verify pump is securely mounted

• Clean exterior surfaces to prevent buildup and contamination

Paint Pump Inspection

• Pass
• Flag
• Fail

Notes

Add pictures if any flags or fail issues

Inspect recirculating pump and paint flow system

• Inspect recirculating pump for leaks or abnormal noise

• Verify hoses and hard lines are properly supported and undamaged

• Check clamps, fittings, and connections for seepage or looseness

• Confirm proper material flow and return to supply drum or tank

• Inspect strainers or filters; clean or replace if necessary

Recirculating Pump & Paint Flow System Inspection

• Pass
• Flag
• Fail

Notes

Add pictures if any flags or fail issues

Inspect hoses, spray lines, and accessories

• Inspect paint hoses for swelling, cracking, or blistering

• Ensure hose routing prevents pinching, rubbing, or trip hazards

• Check spray guns/valves for leaks, proper trigger return, and cleanliness

Hoses, Spray Lines & Accessories Inspection

• Pass
• Flag
• Fail

Notes

Add pictures if any flags or fail issues

Inspect electrical safety components

• Inspect extension cords for cuts, frays, exposed conductors, or damaged insulation

• Inspect extension cords for broken or missing ground pins

• Inspect extension cords for improper splices or repairs

• Ensure cords are not routed through paint, standing liquids, or walkways

• Inspect fans for secure guards and intact housings

• Inspect fans for undamaged power cords and plugs

• Inspect fans for stable mounting and safe positioning

General Electrical Safety Inspection

• Pass
• Flag
• Fail

Notes

Add pictures if any flags or fail issues

Verify housekeeping and area condition

• Verify paint spills are cleaned and containment is in place

• Remove excess materials or debris from pump area

• Confirm fire extinguishers and spill kits are accessible

Housekeeping & Area Condition Inspection

• Pass
• Flag
• Fail

Notes

Add pictures if any flags or fail issues

Perform final verification steps

• Restore air pressure and verify normal operation

• Check for leaks under operating conditions

• Return system to service and remove LOTO if applied

Notes

Add pictures if any flags or fail issues