Daily inspections of the condition and operatability of the safety belt should be carried out by the driver before using the industrial truck. A malfunction can only be detected at an early stage by regular inspection.
Grease all bearings of the steering axle
according to the lubrication schedule with a conventional grease gun at least after 500 hours.
9.2 Check acid density, acid level and cell voltage
Fire protection measures
Servicing of batteries
Disposal of the battery
10.1 Apply grease to running paths and side run areas of idler pulleys in the hoist frame profiles.
10.2 Apply grease to all greasing points of the idler pulleys of the hoist frame and the fork carrier.
10.4 Lubricate lifting chains and chain guides.