Back

Ingersoll Pressure Lubricated Reciprocating Air Compressors 5-30 HP: Annual Maintenance

Performing the Annual Maintenance Tasks will help you obtain reliable and satisfactory service at all times. The procedure focuses on the Condensate Drains -hot to disassemble and clean their components.
MaintainX
05/03/2021

Ingersoll Pressure Lubricated Reciprocating Air Compressors 5-30 HP: Annual Maintenance

3 steps
Performing the Annual Maintenance Tasks will help you obtain reliable and satisfactory service at all times. The procedure focuses on the Condensate Drains -hot to disassemble and clean their components.
  • Warning!

  • When servicing the Air Compressor, shut off all power to the Unit, and drain the Tank of air pressure. Always re-install the Beltguard after adjusting the Belts or Pulleys.

  • Insist on Genuine Ingersoll Rand parts and kits when maintaining your Compressor Unit and Pump.

  • Normal Maintenance

  • Notes:

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.