Back

2015 DOOSAN G20SC-5 Pneumatic Forklifts 2500 Hours/ 15 Months

The 2015 DOOSAN G20SC-5 Pneumatic Forklifts 2500 Hours/ 15 Months form contributes to a safer working environment and prevent costly lift truck repairs. Maximize your forklifts capabilities by consistently performing maintenance.
MaintainX
04/26/2021

2015 DOOSAN G20SC-5 Pneumatic Forklifts 2500 Hours/ 15 Months

30 steps
The 2015 DOOSAN G20SC-5 Pneumatic Forklifts 2500 Hours/ 15 Months form contributes to a safer working environment and prevent costly lift truck repairs. Maximize your forklifts capabilities by consistently performing maintenance.
  • You must read and understand the warnings and instructions contained in the Safety section of this manual, before performing any operation or maintenance procedures.

  • Hydraulic Oil - Change, Check, Clean

  • WARNING: Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.

  • Park the lift truck level with the forks lowered, park- ing brake engaged, transmission in NEUTRAL and the engine stopped.

  • 19.PNG
  • Inspect Battery System

  • 20.PNG
  • Replace Oxygen Sensor (G420F(E) Engine Only)

  • 21.PNG
  • When indicated by MIL, replace oxygen seasor on the exhaust manifold and oxygen sensor on muffler assembly.

  • WARNING: When assembling the filters, check the arrow mark on the filter surface. The arrow mark position is same as fuel flow direction.

  • Checking the TMAP Sensor (G420F(E) Engine Only)

  • 22.PNG
  • Inspect for Intake Leaks (G420F(E) Engine Only)

  • Replace PCV Valve and breather element (LP-Gas, Gasoline and Dual Fuel Engines) - Change

  • Replace Spark Plugs (G420F(E) Engine Only)

  • WARNING: DO NOT OVER TIGHTEN THE SPARK PLUGS.

  • (1) Ignition wiring harness (2) Ignition Coil Assy (3) Spark plug

Source: Doosan