Back

2015 DOOSAN G20SC-5 Pneumatic Forklift 1500 Hours/ 9 Months

The 2015 DOOSAN G20SC-5 Pneumatic Forklift 1500 Hours/ 9 Months is a preventive maintenance form done every 3rd quarter of the year.. It contributes to a safer working environment and prevent costly lift truck repairs. Maximize your forklifts capabilities by consistently performing maintenance.
MaintainX
04/26/2021

2015 DOOSAN G20SC-5 Pneumatic Forklift 1500 Hours/ 9 Months

21 steps
The 2015 DOOSAN G20SC-5 Pneumatic Forklift 1500 Hours/ 9 Months is a preventive maintenance form done every 3rd quarter of the year.. It contributes to a safer working environment and prevent costly lift truck repairs. Maximize your forklifts capabilities by consistently performing maintenance.
  • You must read and understand the warnings and instructions contained in the Safety section of this manual, before performing any operation or maintenance procedures.

  • Drive Axle Oil (Shoe Brake) - Change

  • See topic, “Drive Axle Oil - Change” in “First 50 - 100 Service Hours”

  • Inspect Ignition System (LP-Gas, Gasoline & Dual Fuel Engines Only)

  • G420F(E) Engine

  • Replace LP Fuel Filter Element (LP-Gas, Dual Fuel Engine Only)

  • Park the lift truck in an authorized refueling area with the forks lowered, parking brake applied and the transmission in Neutral.

  • sdsd.PNG
  • Fuel Filter (LP - Gas Engine Only)

  • Disassembly

  • Testing Fuel Lock-off Operation (LP-Gas Engine Only)

  • NOTE : The length of time the engine runs on trapped fuel vapor increases with any increase in distance between the fuel lock-off and the pressure regulator/converter.

  • (1) LP fuel lock-off (2) Regulator / couverter (3) Fuel Trim valve (FTV)

Source: Doosan