1.5 Check safety belt for damages and function
Daily inspections of the condition and operatability of the safety belt should be carried out by the driver before using the industrial truck. . A malfunction can only be detected at an early stage by regular inspection.
Automatic blocking system test:
The automatic system must block the belt.
Do not operate industrial truck with defective safety belt but have it replaced immediately!
1.6 Check retaining system (option)
3.1 Check for wear and damage
7.1 Check the instrument and indicators for correct functioning
Electric fuses of the base machine
Electric fuses o
9.1 Check the battery cables for damage and replace, if necessary
Safety regulations governing the handling of lead-acid batteries
Servicing staff: Recharging, servicing and replacing of batteries must only be per- formed by qualified personnel. The instructions contained in this operating manual, and the instructions of the manufacturer of the battery and of the battery recharging s
Fire protection measures
Servicing of batteries
Disposal of the battery
Apply grease to running paths and side run areas of idler pApply grease to running paths and side run areas of idler pulleys in the hoist frame profiles.ulleys in the hoist frame profiles.
10.3 Lubricate lifting chains and chain guides.
Lifting/lowering fork carrier