Back
Manufacturing / Industrial • Inspections

Rotarytable(Lamination) Daily Preventive Maintenance Checkslit

This procedure outlines the daily preventive maintenance for the lamination rotary table, including checks on pneumatic pressure, vacuum pad condition, lubrication, and sensor function. Regular inspections ensure optimal lamination performance, reduce wear on moving parts, and minimize the risk of air or component failure.
Seoyon E Hwa
07/05/2025

Rotarytable(Lamination) Daily Preventive Maintenance Checkslit

This procedure outlines the daily preventive maintenance for the lamination rotary table, including checks on pneumatic pressure, vacuum pad condition, lubrication, and sensor function. Regular inspections ensure optimal lamination performance, reduce wear on moving parts, and minimize the risk of air or component failure.

    Check the pressure of air regulator

    spec : Main 6~7 bar, Sub : 2~3 bar

    • picture1.png

    check the leaks of connecting part

    • picture2.png

    check the condition of Vacuum pad

    • picture3.png

    check the lubrication of moving part

    • picture4.png

    check the contamination of sensor

    • picture5.png

    check the tightening of terminals

    • picture6.png
Source: Seoyon E Hwa (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.