General • Inspections

WW PM 36-Month Clay Circulating Motor P-10 AMT

The 36-Month PM for the Clay Circulating Motor P-10 AMT is essential for maintaining reliable performance, preventing major failures, and extending motor lifespan. This preventive maintenance ensures optimal circulation efficiency, reduces unplanned downtime, identifies wear before it becomes critical, and supports safe, consistent operation of the clay processing system.

087

05/09/2025

WW PM 36-Month Clay Circulating Motor P-10 AMT

Food Safety Pre-Check

Prior to performing this maintenance task, the areas that may be impacted unintentionally by the maintenance activities were inspected to assure no Partner’s safety is at risk and no customer product or Cintas equipment would be compromised, contaminated, or otherwise damaged due to this specific task. Any product that may be impacted was moved and / or otherwise isolated to assure protection.

* LOTO Confirmation Statement - DO NOT EDIT/REMOVE *

All hazardous energy has been isolated using LOTO procedures?

All potential stored or residual energy has been relieved, disconnected, restrained, lowered, and/or otherwise rendered safe?

Drive Motor

Complete Weekly PM.
Complete the 6-Month PM.
Overhaul the motor if no overhaul has been completed in the past 36 months.

Food Safety Post-Check

After performing this maintenance task, a review of all applicable areas that may have been impacted was conducted to assure there are no residual risks to Partner safety remaining. Also, a review of all applicable areas to ensure that no customer products were inadvertently compromised, contaminated, or otherwise damaged was conducted. If any conditions were observed indicating that any of the previous concerns have been negatively impacted, the issue was escalated to leadership.

Source: 087 (Community Member)

WW PM 36-Month Clay Circulating Motor P-10 AMT

WW PM 36-Month Clay Circulating Motor P-10 AMT

Food Safety Pre-Check

* LOTO Confirmation Statement - DO NOT EDIT/REMOVE *

All hazardous energy has been isolated using LOTO procedures?

Yes

N/A

All potential stored or residual energy has been relieved, disconnected, restrained, lowered, and/or otherwise rendered safe?

Yes

N/A

Drive Motor

Complete Weekly PM.

Complete the 6-Month PM.

Overhaul the motor if no overhaul has been completed in the past 36 months.

Food Safety Post-Check

Food Safety Pre-Check

*** LOTO Confirmation Statement - DO NOT EDIT/REMOVE ***

All hazardous energy has been isolated using LOTO procedures?

Yes

N/A

All potential stored or residual energy has been relieved, disconnected, restrained, lowered, and/or otherwise rendered safe?

Yes

N/A

Drive Motor

Complete Weekly PM.

Complete the 6-Month PM.

Overhaul the motor if no overhaul has been completed in the past 36 months.

Food Safety Post-Check

* LOTO Confirmation Statement - DO NOT EDIT/REMOVE *