CAUTION: CUP CONTAINS A SHARP NEEDLE
The use of a damp cloth rinsed in any mild, nonabrasive, liquid detergent is recommended for cleaning all surfaces on Bunn-O-Matic equipment.
Disconnect the power and water supply to brewer. Allow brewer to cool before proceeding.
Remove the top cover.
Lift reservoir up and set aside.
Remove 5 screws securing rear cover
Place brewer next to a sink.
Remove small tube from left side of tank lid
Insert a syphon tube or hose through the grommet hole to syphon water out of tank.
Source: MaintainX (Community Member)