General • Inspections

WW PM Weekly DAF to Sludge Pump/Air P-4 by Wilden

WW PM Weekly DAF to Sludge Pump and Air Assembly P-4 by Wilden. Maintenance inspections can identify minor issues before they turn into costly repairs. Inspections ensure machines are working correctly and helps prevent equipment downtime.

087

05/13/2025

WW PM Weekly DAF to Sludge Pump/Air P-4 by Wilden

Food Safety Pre-Check

Prior to performing this maintenance task, the areas that may be impacted unintentionally by the maintenance activities were inspected to assure no Partner’s safety is at risk and no customer product or Cintas equipment would be compromised, contaminated, or otherwise damaged due to this specific task. Any product that may be impacted was moved and / or otherwise isolated to assure protection.

Pump Unit

Wipe dirt from the housing. Inspect for physical damage. Open a corrective work order if needed.
Inspect the pump for unusual running noises or vibrations. Inspect and tighten loose fasteners, anchors, and bolts. Open a corrective work order if needed.
Inspect the pump for air and liquid leaks or drips. Open a corrective work order if needed.
Inspect the pump for running rough or slow, or if there is reduced flow. Open a corrective work order if needed.

Air Assembly

Inspect air regulator, gauge, lines, fittings, valves for leaks, unusual wear, moisture. Open a corrective work order if needed.

Food Safety Post-Check

After performing this maintenance task, a review of all applicable areas that may have been impacted was conducted to assure there are no residual risks to Partner safety remaining. Also, a review of all applicable areas to ensure that no customer products were inadvertently compromised, contaminated, or otherwise damaged was conducted. If any conditions were observed indicating that any of the previous concerns have been negatively impacted, the issue was escalated to leadership.

Source: 087 (Community Member)

Food Safety Pre-Check

Pump Unit

Wipe dirt from the housing. Inspect for physical damage. Open a corrective work order if needed.

Inspect the pump for unusual running noises or vibrations. Inspect and tighten loose fasteners, anchors, and bolts. Open a corrective work order if needed.

Inspect the pump for air and liquid leaks or drips. Open a corrective work order if needed.

Inspect the pump for running rough or slow, or if there is reduced flow. Open a corrective work order if needed.

Air Assembly

Inspect air regulator, gauge, lines, fittings, valves for leaks, unusual wear, moisture. Open a corrective work order if needed.

Food Safety Post-Check