Reclaim Line 007 Weekly Preventive Maintenance
This weekly check prevents catastrophic bearing or chain failure, identifies wear parts before they break, and ensures reliable operation, avoiding unplanned downtime and costly emergency repairs.
Amcor - PRY
08/28/2025
Reclaim Line 007 Weekly Preventive Maintenance
This weekly check prevents catastrophic bearing or chain failure, identifies wear parts before they break, and ensures reliable operation, avoiding unplanned downtime and costly emergency repairs.
LOCKOUT/TAGOUT PROCEDURES MUST BE FOLLOWED AT ALL TIMES
APPROPRIATE PPE MUST BE WORN AT ALL TIMES
CHECK HYDRAULIC OIL LEVEL IN SCREEN CHANGER RESERVOIR, FILL AS REQUIRED
VERIFY PROPER OPERATION OF SCREEN CHANGERS - NO LEAKS
CHECK FOR ANY OIL LEAKS AROUND LINE
CHECK ROLL FEED GEARBOX OIL LEVEL, IF INSTALLED, FILL AS REQUIRED
CHECK ROLL FEED BEARINGS AND ROLLERS FOR WEAR, GREASE, IF INSTALLED, REPAIR AS REQUIRED
CHECK EXTRUDER BEARING STACK (PIG) OIL LEVEL, FILL AS REQUIRED
DRAIN AIR-WATER TRAPS. IF APPLICABLE
CHECK WATER SUPPLY FILTERS, IF APPLICABLE, CHANGE AS NEEDED
CHECK WATER LEVEL AND TEMPERATURES ON COOLING TROUGH, ADJUST AS REQUIRED
CHECK FOR ANY WATER LEAKS AROUND THE LINE, REPAIR AS REQUIRED OR CREATE WORK ORDER FOR REPAIR.
CHECK HEATERS FOR DAMAGE, PROPER TEMPERATURES, REPAIR AS REQUIRED OR CREATE WORK ORDER FOR REPAIR.
VERIFY PELLETIZER IS PRODUCING CORRECT SIZE RESIN PELLETS, REPAIR AS REQUIRED OR CREATE WORK ORDER FOR REPAIR.
VISUALLY CHECK CUTTER COMPACTOR BELTS FOR TIGHTNESS OR MISSING BELTS, REPLACE AS REQUIRED
CHECK CUTTER COMPACTOR BLADES, BED AND WALL IF SYSTEM IS EMPTY AND ACCESSIBLE.
VERIFY CAN WATER FLOW, SHAKER TABLE AND SPIN DRYER ARE WORKING PROPERLY, REPAIR AS REQUIRED OR CREATE WORK ORDER FOR REPAIR
CHECK RESIN BLOWER, HOPPER FOR OPERATION, LEAKS, REPAIR AS REQUIRED
CHECK GRINDER FOR CORRECT OPERATION, KNIVES CUTTING GOOD, BLADES INTACT AND NOT BROKEN, IF NOT ENTER WORK ORDER FOR ROTOR KNIIFE AND BED KNIFE REPAIR.
CHECK PROPER OPERATION OF RAM ASSEMBLY, FREE OF PLASTIC, CLEAN AS REQUIRED
CHECK HYDRAULIC LEVEL ON WEIMA RAM ASSEMBLY, FILL AS REQUIRED
CHECK GRINDER GEARBOX OIL LEVEL, FILL AS REQUIRED
CHECK GRINDER DRIVE BELTS FOR CONDITION, REPLACE AS REQUIRED
CHECK OIL IN TORQUE CONVERTER, FILL PORT HAS TO BE AT 2 O'CLOCK POSITION, FILL AS REQUIRED,
CHECK CONVEYOR BELTS, TRACKING GOOD, ANY TEARS OR RIPS, DAMAGE,, TRACK OR REPAIR AS REQUIRED
CHECK CONVEYOR BEARINGS FOR WEAR, REPAIR AS REQUIRED OR ENTER WORK ORDER FOR REPAIR
VERIFY ALL SAFETIES, CONVEYOR, GATE, ETC ARE WORKING, IF NOT SHUT EQUIPMENT DOWN AND REPAIR.
CHECK DUMP TABLE FOR DAMAGE, BEARINGS FOR WEAR, GREASE AS NECESSARY
CHECK HYDRAULIC TANK FOR LEVEL, LEAKS, OR DAMAGE, FILL AS REQUIRED
ASK OPERATORS IF THEY ARE HAVING ISSUES WITH THE LINE, ENTER A WORK ORDER FOR ANY EXTRA WORK DONE OR IF MORE WORK IS NECESSARY AND NEEDS TO BE SCHEDULED
COMMENT
DATE
TECHNICIAN SIGNATURE
Click here to sign
Source: Amcor - PRY (Community Member)