Back
Manufacturing / Industrial • Inspections

135 Trumpf Monthly Preventive Maintenance

This procedure outlines the monthly preventive maintenance for the 135 Trumpf unit, using a color-coded system to identify service points: Red = grease, Blue = spray lubricant, Green = fill point, and White = inspection. Tasks include lubrication, fluid level checks, visual inspections, and operational verification to ensure safe and reliable equipment performance.
Janus Intl. - Georgia
07/08/2025

135 Trumpf Monthly Preventive Maintenance

This procedure outlines the monthly preventive maintenance for the 135 Trumpf unit, using a color-coded system to identify service points: Red = grease, Blue = spray lubricant, Green = fill point, and White = inspection. Tasks include lubrication, fluid level checks, visual inspections, and operational verification to ensure safe and reliable equipment performance.

    Grease

    Refill Grease with Red High Temp Grease 2-3 pumps for each of the following fittings. (have to use machine specific grease gun)

    • Image8.jpg
    • Image7.jpg
    • Image6.jpg
    • Image5.jpg

    Use white lithium grease on the linear gear rail for X axis

    • Image4.jpg
    • Pass
    • Flag
    • Fail

    Hydraulics/Pneumatics

    Inspect the glass gauge on the face of the HPU. Ensure the fluid is at a required level for operation

    • Image9.jpg
    • Pass
    • Flag
    • Fail

    Ensure there is lubricant in the tank on the hydraulic press head (lift lever on the bottom right of the hydraulic press head guard to open)

    • Image10.jpg
    • Image3.jpg
    • Pass
    • Flag
    • Fail

    Ensure the level in pneumatic lubricator is at a required level for operation

    • Image1.jpg
    • Pass
    • Flag
    • Fail

    Visual Inspection

    check tooling for damage/rust

    • Image.jpg
    • Pass
    • Flag
    • Fail

    Ensure that all hosing, pneumatic/hydraulic, alike are free of knicks, cuts, and pinch points.

    • Image3.jpg
    • Image11.jpg
    • Image10.jpg
    • Pass
    • Flag
    • Fail

    Ensure the hosing and cables on X axis are secured and free from snag and pinch points

    • Image2.jpg
    • Pass
    • Flag
    • Fail

    Operational Inspection

    Ensure all operations are functioning properly

    Signature

    Click here to sign
Source: Janus Intl. - Georgia (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.