Paslode F400S Online Servicing

Health and Safety Steps

• Wearing PPE is Mandatory ( Hardhat, protective glasses, steel cap shoes, gloves)

• LOTO the E-Stop after Pushing it

• Try to reset the message of the safety E-Stop

• Avoid Pinch points while working (severe injury can result)

• Never work under a weight

• Never work between two movable mechanical assets, or one movable and one not ( that can result to a Crush and death!!)

Maintenance Technician Signature

The signature of the person performing the job after finishing the health and safety steps

Supervisor Signature

The signature of the person reassuring Health and Safety procedure steps were followed is Mandatory, (the supervisor can be from any production or maintenance or H&S)

Supervisor Validation

Maintenance Technician followed Health and Safety Steps or not?

• Pass
• Flag
• Fail

Paslode Gun online servicing

• Check for any leakage form the rear gasket or the manual valve side ( it needs to be done prior to LOTO)

• Check the magazine empty sensor ( It needs to be done prior to LOTO)

• Check the lower probe nose Spring and change it if damaged

• Check on the trigger and the brass pneumatic actuator especially the screw securing it to that location ( change or replace if damaged ,and if the actuator is wobbling a lot you have to schedule a full gun housing change)

• Check on the sensor and electrical cables

• Check if the magazine is secured as supposed to be with the lock nut

• Check if the Silencer is in a good status at the main air manual valve

• Lubricate both Guns with 06 drops of Pneumatic oil in the main air inlet

• Clean the Both guns from any dust , debris , and oil