Back
Manufacturing / Industrial • Inspections

Gas Detection Manual

This procedure outlines the steps for the yearly review and maintenance of the CTI Gas Detection System, ensuring compliance with relevant standards and proper functionality of sensors, alarms, and controllers.
Catalina Finer Food LLC
10/04/2025

Gas Detection Manual

This procedure outlines the steps for the yearly review and maintenance of the CTI Gas Detection System, ensuring compliance with relevant standards and proper functionality of sensors, alarms, and controllers.

    System Design and Compliance

    Verify compliance with relevant standards and codes

    Sensor and Alarm Setup

    Ensure proper sensor installation in designated areas

    Record ammonia concentration levels at each sensor location

    Meter name
    Unit

    Are all alarm setpoints correctly configured according to Table 3?

    • Yes
    • No
    • N / A

    Controller and Power Supply

    Is the Modbus communication with sensors operational?

    • Yes
    • No
    • N / A

    Entrance Monitors and Horn/Strobes

    Post-Inspection

    Describe any issues found during inspection

    Inspector's signature

    Click here to sign
Source: Catalina Finer Food LLC (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.