Back

Annual Winterization Inspection

These inspections are intended to help prevent cold-weather equipment failures, minimize downtime, and maintain safe, reliable operations throughout the winter months.
[Global Org] Dolese Bros.
11/05/2026

Annual Winterization Inspection

The aim is to assess the readiness of facilities, equipment, and exposed systems for cold weather. It helps identify conditions that could lead to freezing, leaks, damage, or service interruptions, allowing timely preventive action to protect assets and support safe, reliable operation throughout winter.

    Antifreeze Protection

    Verify that coolant freeze protection is rated to at least -22°F to ensure adequate protection against freezing during winter temperatures.

    if the answer is "> -22 "

    Coolant Flush

    Replaced Coolant

    Retest Coolant Protection Level and Record

    Air Brake Systems (If applicable)

    Inspect and verify that air brake system tanks are drained of accumulated moisture. Ensure all air dryers are functioning properly. If unit is not equipped with air brakes, please select N/A.

    if the answer is "noneOf [N/A,Pass]"

    Corrective Action

    Repair and record any deficiencies found during inspection.

    A/C & Heat System Operation

    Verify operation of A/C, heater and defrost systems.

    if the answer is "noneOf [Pass,N/A]"

    Corrective Action

    Repair and record any deficiencies found during inspection.

    On Board Water System

    Drain on board water tank, hoses and valves.

    if the answer is "noneOf [Pass,N/A]"

    Corrective Action

    Repair and record any deficiencies found during inspection.

Source: [Global Org] Dolese Bros. (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.