Back
Manufacturing / Industrial • Inspections

135 Strippit Monthly Preventive Maintenance

This procedure provides a monthly preventive maintenance checklist for the 135 Strippit unit, focusing on lubrication, hydraulic inspection, belt condition, and electrical integrity. Though the laser unit is no longer in operation, the remaining mechanical systems require routine servicing to ensure safe and reliable performance.
Janus Intl. - Georgia
07/08/2025

135 Strippit Monthly Preventive Maintenance

This procedure provides a monthly preventive maintenance checklist for the 135 Strippit unit, focusing on lubrication, hydraulic inspection, belt condition, and electrical integrity. Though the laser unit is no longer in operation, the remaining mechanical systems require routine servicing to ensure safe and reliable performance.

    Grease

    Refill Grease with Red High Temp Grease 2-3 pumps for each of the following fittings

    • Image1.jpg
    • Image3.jpg
    • Image4.jpg
    • Image5.jpg
    • Image8.jpg
    • Image18.jpg
    • Image19.jpg
    • Image100.jpg
    • Image15.jpg
    • Image11.jpg

    Chains

    Inspect and lubricate turret top chain as needed

    • Image10.jpg
    • Pass
    • Flag
    • Fail

    Inspect and lubricate turret bottom chain as needed (above waste conveyor)

    • Image20.jpg
    • Image21.jpg
    • Pass
    • Flag
    • Fail

    Hydraulic

    Ensure the HPU (Hydraulic Power Unit) tank is filled to a required amount

    • Image16.jpg
    • Pass
    • Flag
    • Fail

    Visual Inspection

    Inspect the 2 belts attached to the motor and the flywheel for the hydraulic press

    • Image8.jpg
    • Pass
    • Flag
    • Fail

    Inspect the 3 belts on the top section of the turret

    • Image3.jpg
    • Image9.jpg
    • Image10.jpg
    • Pass
    • Flag
    • Fail

    Inspect the 3 belts on the bottom section of the turret

    • Image5.jpg
    • Image13.jpg
    • Image6.jpg
    • Pass
    • Flag
    • Fail

    Inspect the plugs and connectors to the electrical connections

    • Image.jpg
    • Pass
    • Flag
    • Fail

    Inspect the cables and wired connections for knicks, cuts, or snag points

    • Image24.jpg
    • Pass
    • Flag
    • Fail

    Inspect the hydraulic hoses and connectors for cracks, knicks, and cuts.

    • Image27.jpg
    • Pass
    • Flag
    • Fail

    Operational Inspection

    Ensure all operations are functioning properly

    Signature

    Click here to sign
Source: Janus Intl. - Georgia (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.