Back

Inwatec Mat Roller Weekly PM

Follow this procedure for weekly inspection of your machine to ensure good working condition and prolong life span.
446 Madison WI
10/02/2023

Inwatec Mat Roller Weekly PM

Follow this procedure for weekly inspection of your machine to ensure good working condition and prolong life span.

    Lock Out Tag Out

    LOTO Performed

    Machine Observation

    LOTO - Perform LOTO in accordance with risk assessment.

    Check all safety parts

    • Pass
    • Flag
    • Fail

    Clean moving parts (brushes, etc.) with vacuum or compressed air

    • Pass
    • Flag
    • Fail

    Clean light curtain

    • Pass
    • Flag
    • Fail

    Clean Mat Sensor

    • Pass
    • Flag
    • Fail

    Open rear safety panel & remove all dirt & debris

    • Pass
    • Flag
    • Fail

    Return the Machine to Service using LOTO Restore Procedure

    Run machine - Listen for unusual noise, particularly around all guarding. Feel machine for vibration.

    • Pass
    • Flag
    • Fail

    Check that the inlet conveyor belts are running properly - adjust if necessary, Use LOTO if correction is needed

    • Pass
    • Flag
    • Fail

    Test E-Stop, Lightguard, Start Button, Indicator Lights, back-door interlock & Counter are all operational

    • Pass
    • Flag
    • Fail

    Listen for air leaks in lines, cylinder, regulator, filter, solenoid

    • Pass
    • Flag
    • Fail

    Repair made or needed:

Source: 446 Madison WI (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.