Back

Manitowoc Blend-In-Cup® (BIC) Manual Fill Beverage System Weekly Maintenance

The Manitowoc Blend-In-Cup® (BIC) Manual Fill Beverage System Weekly Maintenance helps you in several ways: avoid expensive repairs, reduce downtime, keep beverage quality high, and extend the life of your equipment meaning you get to enjoy your investment for more years to come. This weekly maintenance form will help your equipment working in optimal conditions, leading to fewer failures, better productivity, higher profitability, and improved safety.
MaintainX
04/26/2021

Manitowoc Blend-In-Cup® (BIC) Manual Fill Beverage System Weekly Maintenance

167 steps
The Manitowoc Blend-In-Cup® (BIC) Manual Fill Beverage System Weekly Maintenance helps you in several ways: avoid expensive repairs, reduce downtime, keep beverage quality high, and extend the life of your equipment meaning you get to enjoy your investment for more years to come. This weekly maintenance form will help your equipment working in optimal conditions, leading to fewer failures, better productivity, higher profitability, and improved safety.
  • NOTE: The following procedures are the basic weekly cleaning instructions, on-screen instructions can vary depending on the recipe that was created with the MenuConnect program or options chosen in the Managers Menu.

  • *These items are optional and may not be displayed on all easyToUCH screens during ZONE 2 Cleaning.

  • Time to complete - 90 Minutes

  • NOTE: An additional 1 hour 45 minutes will be needed if the Sanitizing Ice bin option is enabled in the Managers Menu.

  • 1.PNG
  • 1.PNG
  • NOTE: Failure to complete the weekly cleaning sequence entirely will not reset the weekly cleaning timer and will require the process to be repeated.

  • GATHER THE FOLLOWING SUPPLIES

  • Follow the on-screen instructions and gather the following supplies:

  • NOTE: If other cleaners are used, it is possible they will not clean or sanitize your machine to NSF standards.

  • PRODUCT LINE CLEANING & SANITIZING

  • At Back Room Sink

  • Put on gloves & safety glasses

  • Prepare Cleaning Solutions

  • Follow the on screen instructions and fill each labeled bucket to the fill line with the appropriate solution and bring to machine.

  • Whip Cream Door *, Gasket Seals, & Drip Tray

  • 1.PNG
  • Washing Instructions

  • 1.PNG
  • Spray and wipe refrigerator surfaces with new sanitized clean cloth, including each

  • Connect Cleaning Tubes

  • 1.PNG
  • Rinse Lines

  • 1.PNG
  • Sanitize Lines

  • 1.PNG
  • Whip Cream Door *, Gasket Seals, & Drip Tray

  • 1.PNG
  • Purging Lines

  • 1.PNG
  • NOTE: Air is pushed through each line (slot) blowing out any remaining liquid, displaying the progress on the screen, 30 seconds per slot. When purging has completed the Reinstall Inventory Screen will appear automatically

  • Reinstall Inventory

  • 1.PNG
  • NOTE: This will automatically prime each line with product. The screen will read Priming Slot X. Each slot will change from Purged to Primed. When priming has completed the Prime Completion Screen will appear automatically.

  • Auto Prime Complete

  • 1.PNG
  • Important : Do Not pour down the drain on the BIC unit!

  • Empty Ice Bin

  • Warning: Sharp Objects/Surfaces - Beware of the shaver blade located in the bottom of the ice bin.

  • 1.PNG
  • Dispense Remaining Ice

  • NOTE: Ice will not dispense if ice bin lid is not in place.

  • Ice Bin Wash

  • 1.PNG
  • Warning: When in contact with cleaning and sanitizing solution chemicals gloves and safety glasses are recommended.

  • NOTE: Do not put in dishwasher or power soaker.

  • 1.PNG
  • 1.PNG
  • Capture.PNG
  • BLENDERS / DISPENSE AREA CLEANING & SANITIZING

  • Grate Removal / Blender Station Wash

  • Warning: The blender station contains sharp moving parts. Wear gloves to protect hands.

  • Follow the on screen instructions:

  • Put on gloves and safety glasses.*

  • Capture.PNG
  • Blender Door Removal

  • 1.PNG
  • Blender Station Wash

  • 1.PNG
  • Clean Blender Shaft Bushing

  • 1.PNG
  • Wash Blender Grate(s) / Door(s)

  • 1.PNG
  • Warning : When in contact with cleaning and sanitizing solution chemicals gloves and safety glasses are recommended.

  • Reinstall Blender Door(s)

  • 1.PNG
  • Reinstall Blender Grate(s)

  • 1.PNG
  • Blender Wash

  • 1.PNG
  • 1.PNG
  • 1.PNG
  • Blender Sanitizing

  • 1.PNG
  • 1.PNG
  • 1.PNG
  • Blender Station Sanitizing

  • Warning: The blender station contains sharp moving parts. Wear gloves to protect hands.

  • 1.PNG
  • Whipped Cream Door Cleaning *

  • 1.PNG
  • Dispense Area Cleaning

  • ,Caution: Do Not Insert a brush or sharp object into the red dispense nozzles.

  • 1.PNG
  • Dispensing Area Sanitizing

  • 1.PNG
  • NOTE: The touch screen will return to the Main Menu screen if Drain Cleaning is not active.

  • DRAIN CLEANING - BIO-SHIELD® (OPTIONAL)

  • *Only for units with this feature. These steps will only display during the ZONE 2 Cleaning on units with this feature turned on in the loaded recipe file. If this feature is not active, the interface will automatically proceed to “Weekly Cleaning Complet

  • Prepare Unit for Drain Cleaning

  • 1.PNG
  • Prepare Drain Cleaning Solution

  • 1.PNG
  • Mix Drain Cleaning Solution

  • Important: When in contact with drain cleaning chemicals gloves and safety glasses are recommended.

  • 1.PNG
  • Drain Cleaning

  • 1.PNG
  • Post Drain Cleaning

  • 1.PNG
  • Reinstall Grate(s) / Door(s)

  • 1.PNG
  • Important: Drain cleaner is most effective when left for four (4) hours, but the machine can be used as needed.

  • 1.PNG

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.