Rocker Brushes Inspection
A structured inspection of the rocker brushes to evaluate bristle condition, alignment, mounting security, and overall wear, ensuring consistent surface contact performance and identifying any deficiencies requiring corrective action before they impact equipment reliability or output quality.
Clearwave Car Wash
07/07/2026
Rocker Brushes Inspection
The aim is to verify the condition, alignment, wear, and operational performance of rocker brushes to ensure they function safely and effectively within the equipment or system. By conducting regular inspections, maintenance personnel can implement timely corrective actions, extend the service life of the brushes and associated components, improve equipment reliability, and ensure continued compliance with operational and safety standards.
Structure Components
• We are checking the frame of the equipment making sure it is tight to the floor. • We are checking the overall condition of the framing for pitting or cracks. • We are checking the attached bracketry to ensure no cracks or excessive wear is present.
Floor Anchors
Base / Stand Condition
Framing / Weldments
Wash Components
• We are checking the aluminum channel slots that hold the material in place for excessive wear • We are checking the aluminum channel mounts for missing hardware. • We are checking the Wash material for rips or torn material.
Aluminum Core Panels / Hub
Panel Mounts
Wash Material
Mechanical Components
• We are checking the brush shaft for cracks or wobbles • We are checking the bearings for damage or missing components • We are checking for missing or loose fasteners • We are checking the motor or gearbox for fluid leaks or rotational failures • We are checking the coupling for wobble • We are checking the cylinder or shock for proper absorption, movement or air leaks
Shaft
Bearings
Hardware / Fasteners
Motor
Motor Coupling
Retract Cylinder / Shock
Fluid Components
• We are checking the Application manifold for cracks or clogs • We are checking the fittings for leaks • We are checking the clamps for tightness • We are checking the hoses for leaks or worn coatings • We are checking the nozzles for clogs or ripped diaphragms
Applicator Manifold
Fittings
Clamps
Hoses
Nozzles
Overall Condition DS Brush
Overall Condition PS Brush
Comments
Date
Sign when completed
Click here to sign
Source: Clearwave Car Wash (Community Member)