Ice Machine Filter Replacement

Opening and closing a valve

Main water valve will be the first valve on the pipe coming out of the wall. Please see picture.

Most locations will have a blue valve with a hose attached directly under. Drain the water until no further water is in the clear drain hose. Please see picture.

Turn the filters half a turn to the left, they will drop out. Have rags and a bucket underneath. Excess water will flow from where the filter sits.

Install new filter cartridges by pressing the new filter up and rotating a half turn to the right until you feel the filter has locked in. Continue until all 3 are securely inserted.

• Add scotch tape or write directly on the filter today's date. Filters are to be replaced every 2-3 months from the date of replacement depending on how frequent ice is used.

Draining new filters will clean and remove any loose particles inside the filter, thus keeping them from getting into the ice machine. Do this for about 2-3 minutes.

• 1: Open the main shut off valve about 1/2 way ( In the picture this is the yellow circled valve )

• 2: Open the blue water drain valve fully ( In the picture this is the blue circled valve )

• Close the valve directly behind the filters ( In the picture this is the pink circled valve ) This will keep water from flowing into the machine

Please follow steps in exact order.

• 1: Close the blue circled valve

• 2: Open the pink circled valve

• 3: Open the yellow circled