Pre-Inspection Procedure for Skyjack SJ30-AJE
This procedure is used to inspect the Skyjack SJ30-AJE before each use, so defects are found and reported before anyone operates the platform.
Compotech Inc
03/20/2026
Pre-Inspection Procedure for Skyjack SJ30-AJE
This procedure outlines the pre-use inspection of the Skyjack SJ30-AJE aerial work platform to confirm it is safe and ready for operation. It guides the operator through visual checks, fluid levels, tires and wheels, controls and safety devices, battery, brakes and steering, and emergency systems.
Visual Inspection
Inspect for visible damage or signs of wear
Check for loose or missing components
Fluid Levels
Top up hydraulic fluid if necessary
Tires and Wheels
Inspect tires for damage
Ensure wheel nuts are tight and not missing
Controls and Safety Devices
Test all operator controls for proper function
Verify operation of safety devices
Battery
Ensure battery connections are clean and secure
Brakes and Steering
Test braking system for proper function
Check steering operation for smoothness and responsiveness
Emergency Systems
Operate emergency lowering and stop systems
Confirm emergency exit routes are clear
Notes
Refer to the operator's manual specific to the SJ30-AJE model for any additional pre-inspection procedures. If any defects or issues are found, report them immediately and refrain from using the platform until repairs are completed.
Source: Compotech Inc (Community Member)