Tagging Chains Operator PM Checklist
An operator-level preventive maintenance checklist for all tagging chain systems to inspect chain condition, tension, lubrication, and sprocket wear, ensuring reliable tagging performance and identifying any deficiencies requiring corrective action before they impact production continuity or equipment reliability.
524 Rockledge
04/08/2026
Tagging Chains Operator PM Checklist
This procedure outlines the daily and weekly preventive maintenance checks for tagging chains to ensure the equipment is safe, properly guarded, and in good operating condition. It helps operators identify damage, missing components, control issues, and other maintenance concerns so they can be reported and addressed promptly.
Start-Up
Inspect labeling and lockout tagout signage
Inspect guard placement and condition
Inspect condition of controls and labeling
If equipped, inspect photo eyes or limit switches for damage
Inspect the general condition of the equipment
Test E-stops are operational
Weekly
Inspect equipment for loose or missing fasteners
Inspect equipment for damage and broken welds
Comments/Notes
If a problem is found, make a note in the comments section and report it to the appropriate person.
Operator Signature
Turn in completed sheets at the end of the week to the appropriate person.
Click here to sign
Source: 524 Rockledge (Community Member)