Bi-Weekly Preventive Maintenance Crew - Curioni
The Bi-Weekly PM Crew - Curioni procedure outlines the scheduled preventive maintenance tasks to be performed every two weeks on Curioni equipment. It includes routine inspections, cleaning, lubrication, and adjustments to ensure optimal performance and prevent breakdowns, helping to extend the equipment's lifespan and maintain efficiency.
Flint Packaging
05/15/2025
Bi-Weekly Preventive Maintenance Crew - Curioni
The Bi-Weekly PM Crew - Curioni procedure outlines the scheduled preventive maintenance tasks to be performed every two weeks on Curioni equipment. It includes routine inspections, cleaning, lubrication, and adjustments to ensure optimal performance and prevent breakdowns, helping to extend the equipment's lifespan and maintain efficiency.
Diagram
FEEDING SECTION
Condition of the feed wheels and feed roll.
Report the condition of the feed wheels and feed roll
Inspect the condition of the feed table
Report the condition of the feed table
Check the oil level in the frame glass indicator on the operator's side. If low create WO
PRINT 1st STATION
Remove all covers and pans from the ink assembly and clean the machine thoroughly.
Report the condition of operation of the ink pump.
Check the rubber roll for wears
PRINT 2ND STATION
Remove all covers and pans from the ink assembly and clean the machine thoroughly.
Report the condition of operation of the ink pump.
Check the rubber roll for wears
PRINT 3RD STATION
Remove all covers and pans from the ink assembly and clean the machine thoroughly.
Report the condition of operation of the ink pump.
Check the rubber roll for wears
SCORING
Check for any misalignment and report condition
SLOTTING
Check all jiffy plates for excessive wear; Report unnecessary wear by head number.
Check any misalignment of male and female slotting sections and report.
DIE CUTTING
Check the wear of anvils and rotate if necessary.
Check oscillations: ensure the drum is oscillating as intended.
Check die bolts, report any stripped bolt holes with a circle using a black marker.
GLUE SYSTEM
Pump vinegar through the glue system flush the system
FOLDING SECTION
Check the correct operation of the warning lights on control panels.
Report the condition and alignment of all folding rails and belts.
Check the tension of all folding belts and adjust the tension.
Check the condition of the wear and tear of the belts and report.
Check the condition of the springs in the rollers of the belts
DELIVERY UNIT
Check the upper and lower conveyor belts and report the condition.
Check that the warning lights present on the control panels work correctly.
Check the condition of conveyor rollers.
Check the ejector aluminum inserts and the bundle separating feet.
COUNTER EJECTOR
Check belts for wear. Create a work order if needed.
Check condition of all moving parts and create a work order if needed.
BUNDLER
LOAD FORMER
Check for any oil leaks. Clean up and create a work order if needed.
Check for any air leaks. Create a work order if needed.
Completion
Completed on
Completed by
Source: Flint Packaging (Community Member)