Back

Location 59 Quarterly Steam Trap Inspection

Check all steam traps for a difference of 80 degrees between the inlet and outlet. The steam trap inspection is an important part of traps park management of an installation. Once the failure is confirmed, the trap must be repaired or replaced as soon as possible, for greater profitability.
059 Las Vegas NV
03/17/2024

Location 59 Quarterly Steam Trap Inspection

Check all steam traps for a difference of 80 degrees between the inlet and outlet. The steam trap inspection is an important part of traps park management of an installation. Once the failure is confirmed, the trap must be repaired or replaced as soon as possible, for greater profitability.

    *** LOTO Confirmation Statement - DO NOT EDIT/REMOVE ***

    All hazardous energy has been isolated using LOTO procedures?

    All potential stored or residual energy has been relieved, disconnected, restrained, lowered, and/or otherwise rendered safe?

    Lock Out Tag Out

    LOTO Performed

    All plant steam traps shall be listed and mapped , and quarterly inspections shall be verified by audible test or a temperature difference of a minimum of 80° F between trap inlet and outlet

    • Pass
    • Flag
    • Fail

    Repair made or needed:

    Above Wash alley visible light image

    Add or drag pictures

    Above Wash alley thermal image

    Add or drag pictures

    above wash alley Temp in

    Meter name
    Unit

    above wash alley Temp out

    Meter name
    Unit

    Above Wash alley thermal image

    • Pass
    • Flag
    • Fail

    Above Maintenace shop visible light image

    Add or drag pictures

    Above Maintenace shop thermal image

    Add or drag pictures

    Above Maintenace shop thermal image

    • Pass
    • Flag
    • Fail

    above maintenance shop Temp out

    Meter name
    Unit

    above maintenance shop Temp in

    Meter name
    Unit

    Steam tunnel visible light image

    Add or drag pictures

    Steam tunnel thermal image

    Add or drag pictures

    Steam tunnel thermal image

    • Pass
    • Flag
    • Fail

    steam tunnel Temp in

    Meter name
    Unit

    steam tunnel Temp out

    Meter name
    Unit

    Pant press visible light image

    Add or drag pictures

    Pant press thermal image

    Add or drag pictures

    Pant press thermal image

    • Pass
    • Flag
    • Fail

    pant pressTemp in

    Meter name
    Unit

    Pant Press Temp out

    Meter name
    Unit

    Triple Buck visible light image

    Add or drag pictures

    Triple Buck thermal image

    Add or drag pictures

    Triple Buck Temp in

    Meter name
    Unit

    Triple Buck Temp out

    Meter name
    Unit

    under ironer 1 visible light image

    Add or drag pictures

    under ironer 1 thermal image

    Add or drag pictures

    under ironer 1 thermal image

    • Pass
    • Flag
    • Fail

    1 Temp in

    Meter name
    Unit

    1 Temp out

    Meter name
    Unit

    under ironer 2 visible light image

    Add or drag pictures

    under ironer 2 thermal image

    Add or drag pictures

    under ironer 2 thermal image

    • Pass
    • Flag
    • Fail

    2 Temp in

    Meter name
    Unit

    2 Temp out

    Meter name
    Unit

    under ironer 3 thermal image

    Add or drag pictures

    under ironer 3 visible light image

    Add or drag pictures

    under ironer 3 visible light image

    • Pass
    • Flag
    • Fail

    3 Temp in

    Meter name
    Unit

    3 Temp out

    Meter name
    Unit

    under ironer 4 visible light image

    Add or drag pictures

    under ironer 4 thermal image

    Add or drag pictures

    under ironer 4 thermal image

    • Pass
    • Flag
    • Fail

    4 Temp in

    Meter name
    Unit

    4 Temp out

    Meter name
    Unit

    under ironer 5 thermal image

    Add or drag pictures

    under ironer 5 visible light image

    Add or drag pictures

    under ironer 5 thermal image

    • Pass
    • Flag
    • Fail

    5 Temp in

    Meter name
    Unit

    5 Temp out

    Meter name
    Unit

    under ironer 6 visible light image

    Add or drag pictures

    under ironer 6 thermal image

    Add or drag pictures

    under ironer 6 thermal image

    • Pass
    • Flag
    • Fail

    6 Temp in

    Meter name
    Unit

    6 Temp out

    Meter name
    Unit

    under ironer 7 thermal image

    Add or drag pictures

    under ironer 7 visible light image

    Add or drag pictures

    under ironer 7 thermal image

    • Pass
    • Flag
    • Fail

    7 Temp out

    Meter name
    Unit

    7 Temp in

    Meter name
    Unit

    under ironer 8 visible light image

    Add or drag pictures

    under ironer 8 thermal image

    Add or drag pictures

    under ironer 8 thermal image

    • Pass
    • Flag
    • Fail

    8 Temp in

    Meter name
    Unit

    8 Temp out

    Meter name
    Unit

    under ironer 9 thermal image

    Add or drag pictures

    under ironer 9 visible light image

    Add or drag pictures

    under ironer 9 thermal image

    • Pass
    • Flag
    • Fail

    9 Temp in

    Meter name
    Unit

    9 Temp out

    Meter name
    Unit

    above ironer visible light image

    Add or drag pictures

    above ironer thermal image

    Add or drag pictures

    above ironer thermal image

    • Pass
    • Flag
    • Fail

    above ironer in

    Meter name
    Unit

    above ironer out

    Meter name
    Unit

    Camera model

    IR sensor size

    Camera serial number

    Camera manufacture

Source: 059 Las Vegas NV (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.