Back

Poland Pad Wash Inspection (Polish)

A complete inspection is an important preventive way to make sure Pad Wash is safe for use and that all systems are working properly.
Tosca DACH & POL
01/22/2024

Poland Pad Wash Inspection (Polish)

A complete inspection is an important preventive way to make sure Pad Wash is safe for use and that all systems are working properly.

    Section #1 / Sekcja #1

    Check all emergency stops on gates and light barriers work / Sprawdź działanie wszystkich wyłączników awaryjnych na bramach i barierach świetlnych.

    • Pass
    • Flag
    • Fail

    Check Infeed conveyor for condition / Sprawdź stan przenośnika podającego

    Check Infeed conveyor for condition Pass/Fail / Sprawdzenie przenośnika podającego pod kątem stanu Pass/Fail

    • Pass
    • Flag
    • Fail

    Check Infeed Pallet lift for leaks and condition / Sprawdzić szczelność i stan podnośnika paletowego.

    • Pass
    • Flag
    • Fail

    Check Pneumatic Pad Lift system for condition / Sprawdź stan systemu pneumatycznego podnoszenia klocków hamulcowych

    • Pass
    • Flag
    • Fail

    Check Air Filter Regulator for condition / Sprawdź stan regulatora filtra powietrza

    • Pass
    • Flag
    • Fail

    Check Wash Plant pumps for leaks / Sprawdzić pompy myjni pod kątem wycieków

    • Pass
    • Flag
    • Fail

    Check fans for operation and condition / Sprawdź działanie i stan wentylatorów

    • Pass
    • Flag
    • Fail

    Check main motor bearings and chains for condition / Sprawdzić stan łożysk i łańcuchów silnika głównego

    • Pass
    • Flag
    • Fail

    Check SA47 Motor Gearbox for condition / Sprawdź stan przekładni silnika SA47

    • Pass
    • Flag
    • Fail

    Check all bearings on the drive side of the machine for condition and grease / Sprawdź stan i nasmaruj wszystkie łożyska po stronie napędu maszyny.

    • Pass
    • Flag
    • Fail

    Check all bearings and chains on non drive side for condition & grease / Sprawdź stan i nasmarowanie wszystkich łożysk i łańcuchów po stronie nienapędowej.

    • Pass
    • Flag
    • Fail

    Check Outfeed Pallet Lift for condition / Sprawdź stan podnośnika palet na wyjściu

    • Pass
    • Flag
    • Fail

    Check Outfeed Conveyor chains & Bearings for condition / Sprawdź stan łańcuchów i łożysk przenośnika wyjściowego

    • Pass
    • Flag
    • Fail

    Check all sensors for condition and alignment / Sprawdź stan i wyrównanie wszystkich czujników

    • Pass
    • Flag
    • Fail

    0 - Signature Block Polski

    Imię, nazwisko i podpis Dodatek do zlecenia pracy

    Imię i nazwisko:

    Znak

    Click here to sign
Source: Tosca DACH & POL (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.