2.1 Test operation of:
2.7 Test safety switch
When lifting from approx. 1.8 m (depending on the mast type):
4.2 Check battery connections are secure, grease terminals if necessary.
7.10 Check cylinders and piston rods for damage and leaks, and make sure they are secure
7.11 Check the hydraulic oil level
There are markings on the hydraulic reservoir. The oil level must be checked when the load forks are lowered.
If necessary add hydraulic oil of the correct grade (see Section 5.1) – see table.
Assembly is the reverse order.
Agreed performance levels