Bi-Monthly Mobi Site Inspection

Check for VFD Errors and Alarms

Check if the VFD fan works

Tighten any loose connections.

Attach a photo of the VFD screen.

Media Filters

Raw water pump

Micron Filters

Main Spectra Controls

Confirm that the feed pressure gauge works

Attach photo of the feed pressure gauge while the system is running.

Add or drag pictures

Confirm that the high pressure analog gauge works

Attach photo of the high pressure gauge while the system is running.

Add or drag pictures

Compare the product flow meter reading to the sensor reading

Attach a photo of the raw water and product flow tubes while the system is running.

Add or drag pictures

Confirm that the brine pressure is between 0 & 3psi

Attach photo of the brine pressure gauge.

Add or drag pictures

KB Genesis Controller

Pearson Pumps

Confirm that the pump sounds okay

Confirm that the pump is not leaking.

Confirm that all the pressure hoses are in good condition and well secured.

Confirm that the Pearson motor sounds okay.

Any Other Observations?

Spectra Sensors

Confirm that the boost pressure sensor has the same reading as the analog gauge.

Confirm that the high pressure sensor has the same reading as the analog gauge.

Attach photo of the alarms/ sensors page.

Add or drag pictures

Inverters

Check for errors on the inverter display.

Confirm that all the DC and AC cables are still intact.

Confirm that the inverters are still connected to the internet.

Powerwalls

Confirm that all the powerwalls are still stacked together with the appropriate connectors.

Confirm that all the powerwalls are still electrically connected as prescribed by Tesla.

Confirm that all the powerwalls are still grid forming.

Attach photo of the grid forming page of the powerwalls.

Add or drag pictures

Generation and Distribution Panel

Confirm that all the cables are still terminated as required.

Confirm that all cables still have the insulation as required.

Confirm that all the breakers are still on.

Confirm that none of the breakers is heating up.

Confirm that all cable connectors are still in good condition.

Attach a photo of generation breakers in Tesla Gateway.

Add or drag pictures

Attach a photo of the distribution panel.

Add or drag pictures

Product and Raw Water Tanks.

Network Equipment

Confirm that the network switch is still connected as required and that all cables are intact.

Confirm that the site WIFI still works.

Confirm that the broadcasted internet is GivePower.

Distribution pumps & VFD

Confirm that the small distribution pump VFD works.

Confirm that the small distribution pump stops when the valves are closed.

Chemical Dosing Pumps

Plumbing Network

Check for all leaks along the pipes and connectors.

Confirm that all valves can open and close fully.

Confirm that all the none return valves at the site are working as required.

Soakpit, Injection Well & Washrooms

Metallic Structures ,Walls & Others

Date

Site Name

Borehole Pump VFD

Check for VFD Errors and Alarms

Check if the VFD fan works

Tighten any loose connections.

Attach a photo of the VFD screen.

Media Filters

Check if the media screen works

Check for any leaks

Confirm that the media filter lockout works.

Raw water pump

Confirm if the pumps sound okay

Check for any leaks

Micron Filters

Check for leaks and air in the filter housing.

Confirm that the filter condition is above 50%

Main Spectra Controls

Confirm that the feed pressure gauge works

Attach photo of the feed pressure gauge while the system is running.

Confirm that the high pressure analog gauge works

Attach photo of the high pressure gauge while the system is running.

Compare the product flow meter reading to the sensor reading

Attach a photo of the raw water and product flow tubes while the system is running.

Confirm that the brine pressure is between 0 & 3psi

Attach photo of the brine pressure gauge.

KB Genesis Controller

Confirm that the drive is working as expected.

Use the power and status LEDs

Pearson Pumps

Confirm that the pump sounds okay

Confirm that the pump is not leaking.

Confirm that all the pressure hoses are in good condition and well secured.

Confirm that the Pearson motor sounds okay.

Any Other Observations?

Spectra Sensors

Confirm that the boost pressure sensor has the same reading as the analog gauge.

Confirm that the high pressure sensor has the same reading as the analog gauge.

Attach photo of the alarms/ sensors page.

Inverters

Check for errors on the inverter display.

Confirm that all the DC and AC cables are still intact.

Confirm that the inverters are still connected to the internet.

Powerwalls

Confirm that all the powerwalls are still stacked together with the appropriate connectors.

Confirm that all the powerwalls are still electrically connected as prescribed by Tesla.

Confirm that all the powerwalls are still grid forming.

Attach photo of the grid forming page of the powerwalls.

Generation and Distribution Panel

Confirm that all the cables are still terminated as required.

Confirm that all cables still have the insulation as required.

Confirm that all the breakers are still on.

Confirm that none of the breakers is heating up.

Confirm that all cable connectors are still in good condition.

Attach a photo of generation breakers in Tesla Gateway.

Attach a photo of the distribution panel.

Product and Raw Water Tanks.

Check for leaks around the connectors and pipes.

Confirm if the tanks are clean.

Network Equipment

Confirm that the network switch is still connected as required and that all cables are intact.

Confirm that the site WIFI still works.

Confirm that the broadcasted internet is GivePower.

Distribution pumps & VFD

Confirm that the small distribution pump VFD works.

Confirm that the small distribution pump stops when the valves are closed.

Chemical Dosing Pumps

Confirm that the pumps are not leaking.

Confirm that all the chemical pumps are working.

Plumbing Network

Check for all leaks along the pipes and connectors.

Confirm that all valves can open and close fully.

Confirm that all the none return valves at the site are working as required.

Soakpit, Injection Well & Washrooms

Confirm that we do not have any leaks.

Inspect for potential sinkholes.

Metallic Structures ,Walls & Others

Check for cracks on the walls.

Confirm if the walls need to be repainted.

Check for rust.