Back
General • Inspections

8 Simple Logout Tagout Procedures

This LOTO inspection procedure help organizations and companies understand exactly what is required for annual LOTO inspections. The purpose of the inspection(s) is to ensure that the lockout/tagout procedures in place are adequate, and if they are not, then corrections must be made.
MaintainX
07/26/2022

8 Simple Logout Tagout Procedures

This LOTO inspection procedure help organizations and companies understand exactly what is required for annual LOTO inspections. The purpose of the inspection(s) is to ensure that the lockout/tagout procedures in place are adequate, and if they are not, then corrections must be made.

    Find the procedure to be used.

    Notify anyone affected by the lockout tagout.

    Locate all listed energy sources.

    Shut down the machine or equipment.

    Lockout and tag all energy isolating devices.

    Release any stored energy (steam, hydraulic, etc.).

    Operate controls to test disconnects. The machine or equipment should not operate.

    Return controls to off position.

Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.