Back

Internal Combustion Forklift: Pre-Operation Inspection

This checklist provides a list of items operators must inspect and items they should also be aware of during a pre-start check each day. Operators should record that they’ve completed the check and any issues found.
MaintainX
07/21/2022

Internal Combustion Forklift: Pre-Operation Inspection

This checklist provides a list of items operators must inspect and items they should also be aware of during a pre-start check each day. Operators should record that they’ve completed the check and any issues found.

    Forklift Make:

    Model:

    Serial #:

    Checks: Engine Off

    Initials / Date:

    Checks: Engine On – Unusual Noises Must Be Investigated Immediately

    Deficiency Explanations

    Indicate below which line item from the inspection checklist you are referencing. Provide a brief description of the problem. Remove the forklift from service as necessary, tag with an appropriate notice, and date when the service removal was initiated.

    Important Note: Not all deficiencies will require the forklift’s removal from service. For example, if a tire is low you should place an ‘X’ in row 2. Then, explain below that you refilled the tire. Often, there is a real benefit in maintaining a record of these minor repairs. Such as in this case, a trend could reveal the tire suffers from a slow leak.

    Item #:

    Explanation:

    Date tagged "out of service":

    Date repaired "back in service":

Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.