Back

Excavator service (F) 8000hr (midlife) (10t or less)

-Cabin filters -Wiper blades -Sample kit -Engine oil & filter -Fuel filter -Fuel separator -Outer air filter -Inner air filter -Swing box oil -Damper case oil -Pilot filter -HP screen (if applicable) -Hydraulic return filter & plate o-ring -Suction screen -Hydraulic oil -Final drive oil -Grease -Coolant -Belt tensioner -Fan belts -Radiator cap -Water pump -Thermostat -Radiator hoses -Rear main seal -Drive coupling -Rocker cover seal -injectors & seals
Brisbane Diesel
04/30/2023

Excavator service (F) 8000hr (midlife) (10t or less)

-Cabin filters -Wiper blades -Sample kit -Engine oil & filter -Fuel filter -Fuel separator -Outer air filter -Inner air filter -Swing box oil -Damper case oil -Pilot filter -HP screen (if applicable) -Hydraulic return filter & plate o-ring -Suction screen -Hydraulic oil -Final drive oil -Grease -Coolant -Belt tensioner -Fan belts -Radiator cap -Water pump -Thermostat -Radiator hoses -Rear main seal -Drive coupling -Rocker cover seal -injectors & seals

    PRE-SERVICE CHECKS

    LUBE SERVICE

    Change cabin filter(s)

    Fill washer bottle

    Change wiper blades

    Change engine oil & filter

    Clean crankcase breather

    Change fuel filter (s)

    Change fuel separator

    Change outer air filter

    Change inner air filter (if applicable)

    Clean swing box breathers

    Change swing box oil

    Change damper case oil (if applicable)

    Change pilot filter

    Change hydraulic HP filter(S) (if applicable)

    Change hydraulic return filter (if applicable)

    Change/clean suction screen (if applicable) and replace plate O-rings

    Replace hydraulic oil

    Change final drive oil

    Grease machine & change out any no receptive nipples

    Adjust track tension

    Change coolant

    Change belt tensioner

    Change fan belts

    Change radiator cap

    Change water pump

    Change thermostat

    Change radiator hoses

    Change rear main seal and hydraulic drive coupling

    Replace rocker cover seal

    Perform valve lash adjustment

    Change injectors & injector tubes

    CABIN INSPECTIONS

    Check door seals

    Check rubber floor mats

    Check travel levers

    Check operator seat condition

    Check seat belt function

    Check windows for cracks / stone chips

    Check hood lining

    Check arm rests

    Check A/C louvers

    Check AM/FM radio

    Check UHF radios

    Check display screen for faults & reset service intervals

    Start machine and test e-stops

    Check joystick neutral position

    Test lockout lever function

    Function test all operations and test for boom creep

    Check Air conditioning functions

    Check quick hitch function

    Check rotating beacon

    Check auto idle function

    Check light function

    Roll boom out to service position & shut down

    Complete movement checks on boom joints

    IMPLEMENT INSPECTION

    Check attachment G.E.T condition and report

    Check attachments for cracks

    Check quick hitch hoses

    Check quick hitch for cracks

    Check stick(dipper) for cracks

    Check hydraulic all hoses/tubes

    Check all hydraulic cylinders for leaks and rod damage

    Check dozer blade condition

    Check for leaks on dozer blade cylinders

    Check condition of cylinder covers (if applicable)

    UPPER STRUCTURE

    Check for panel damage and report

    Check and lubricate door hinges and struts

    Check electrical harnesses

    Remove battery terminals, clean and apply protectant

    Check battery voltage and load test

    Check for leaks in hydraulic cabinets

    Check belly guards

    Check handrail condition and report

    Check counter weight bolts in place and tight

    Check ROPS / FOPS

    Check covers on upper structure

    Check intake system clamps and hoses and mounting

    Check exhaust clamps tubes and mounting

    Check fuel hoses for rubbing

    Check engine / pump mount condition

    Check guards around fan

    Clean coolers out

    Check all hosing

    Check extinguishers (in date and has pressure)

    Check control solenoid valves for leaks and rubbing on harnesses

    UNDERCARRAIGE INSPECTION

    Remove slew belly plate and inspect centre joint for leaks

    Remove travel motor guards and clean out cavities

    Inspect hoses from upper structure

    Inspect LH sprocket condition for scalloping

    Inspect LH track assembly and report condition

    Inspect LH idler condition

    Inspect LH load rollers

    Inspect LH carrier rollers

    Inspect RH sprocket condition for scalloping

    Inspect RH track assembly and report condition

    Inspect RH idler condition

    Inspect RH load rollers

    Inspect RH carrier rollers

    Check track frames for cracks

    Install cover plates

    POST SERVICE CHECKS

    Fill out sample slips and post

    Clean up oil trays

    Run up machine and get to operating temperature and check over machine

    Record labour

    Fill out service sticker fit to window

    Perform hydraulic tune

Source: Brisbane Diesel (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.