Back

MV & HV truck, tippers & prime mover (B) 20,000km

Equipment maintenance involves the continuous process of checking, repairing, and servicing operating equipment to ensure businesses can function without interruption.
Brisbane Diesel
04/30/2023

MV & HV truck, tippers & prime mover (B) 20,000km

Equipment maintenance involves the continuous process of checking, repairing, and servicing operating equipment to ensure businesses can function without interruption.

    PRE-TASK

    LUBE SERVICE

    Change engine oil & filter

    Clean crankcase breather

    Change fuel filter (s)

    Change fuel separator

    Change outer air filter

    Grease king pins

    Grease suspension bushes

    Grease steering linkages

    Grease drive shaft and center joints

    Grease slack adjusters

    Grease any AUX system point

    CABIN INSPECTIONS

    Check windscreen and window condition

    Check window winder operation

    Check mirrors and electric function

    Check seat foam and condition

    Check seat belts

    Check seat suspension

    Check wiper/washer function

    Check Pedal rubbers & floor mats

    Check AM/FM radio

    Check instrument cluster function

    Check gear selector & park brake

    Check horn function

    ENGINE INSPECTIONS

    Check for oil, fuel, cooling leaks

    Check fuel line condition and chafing

    Prime fuel system

    Check intake plumbing integrity

    Check Exhaust system integrity

    Check engine mount condition

    check pulleys, belts and tensioners

    check guarding in tact

    Inspect engine harness condition & security

    Check battery condition and charge rate

    COOLING SYSTEM INSPECTIONS

    Check coolant level & test glycol levels

    Check water pump bearing

    Check fan/viscos condition

    Check radiator hoses and clamps

    Check and clean radiator core

    Check overflow bottle

    Check radiator mounts

    POWERTRAIN/STEERING/SUSPENSION/CLUTCH/BRAKE SYSTEM INSPECTIONS

    Check for transmission leaks

    Check differential(s) for leaks

    Check tyre tread condition

    Check tyre inflation levels and adjust

    Check wheel nut tension

    Adjust brakes

    Record brake lining thickness and report

    FRAME AND BODY INSPECTION

    Check add blue system if applicable

    Inspect air system for leaks

    Drain air system

    Check any AUX system components

    Check suizie coils

    Check turntable and grease

    Check lights and lenses condition

    Check cabin mounts and hinges and tilt lock mechanism

    Check all panels for damage and report

    Check fuel/add blue/hydraulic tank mounts

    Check PTO system operation if applicable

    Check chassis for rust, cracks or twists

    DPF slow manual regen (if applicable)

    Check tow hitch and plugs

    Check any hydraulic cylinders

    Reset service intervals on dash

    Fill out service sticker

Source: Brisbane Diesel (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.